Shown on vehicle with diesel engine |
1 | System selection button |
2 | Accept call button |
3 | OK button |
4 | Scroll forward button |
5 | Exit menu button |
6 | Multifunction display |
G00.20-3160-11
Dialing | |||
1 | Close doors. | ||
2 | Turn key in ignition lock into position "1". | The standard display (total distance) must appear in the multifunction display (6), if necessary press the scroll forward button (4) repeatedly. | |
3 | Repeatedly press system selection button (1) until menu item "Trip" is highlighted on the multifunction display (6). | "Trip" remains selected for approx. 5 s. Operation step 4 must be carried out within this time. | |
4 | First press and hold down Accept call button (2) and then, within 1_second, also press the "OK" button (3) and hold for approx. 5_seconds. | The multifunction display (6) shows the Workshop menu with the "Vehicle data", "Dynamometer test" and "ASSYST PLUS" tabs. | |
5 | Press the scroll forward button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with the OK button (3). | ||
Read out maintenance data | |||
6 | Select "Service data" tab and confirm with OK button (3). | Note down the service code (e.g. "A") shown on the multifunction display (6). | |
7 | Press scroll forward button (4) repeatedly and read out remaining time, remaining distance and oil data record (e.g. 01 1F 00). | Note down the readout data. | |
8 | Press "Exit menu" button (5) repeatedly until standard display (total distance) appears in the multifunction display (6). | ||
Reset service data | |||
9 | Turn key in ignition lock into position "2". | ENGINE 622 | |
10 | Press system selection button (1) repeatedly until workshop menu with "Vehicle data", "Dynamometer test" and "ASSYST PLUS" tabs appears in multifunction display (6). | ||
11 | Press the scroll forward button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with the OK button (3). | The workshop menu with the "Service data", "Full service" and "Oil measurement" tabs appears in the multifunction display (6). | |
12 | Press the scroll forward button (4) repeatedly until "Full Service" is highlighted and confirm selection with the OK button (3). | The multifunction display (6) then shows, e.g. "Service A" and "Confirm with OK". | |
13 | Confirm with "OK" button (3). | The multifunction display (6) shows the oil selection. | |
14.1 | Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3). | Engine 622.8/9 | |
| Service Information: Oil specification | Engine 622.8 | |
To achieve the maximum kilometer interval, engine oil for engine 622.9 that complies with the Specifications for Operating Fluids, Sheet 228.51 must be used and confirmed. | |||
14.2 | Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3). | Engine 651.9 | |
To achieve the maximum kilometer interval, the engine oil that complies with the Specifications for Operating Fluids, Sheet 228.51, 229.51/.52 must be used and confirmed. | |||
14.3 | Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3). | Engine 654.9 | |
To achieve the maximum kilometer interval, engine oil that complies with the Specifications for Operating Fluids, Sheet 229.51/52/71 must be used and confirmed. | |||
14.4 | Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3). | Engine 274.9 | |
To achieve the maximum kilometer interval, engine oil that complies with the Specifications for Operating Fluids, Sheet 229.5 must be used and confirmed. | |||
15 | Press scroll forwards button (4) until "Yes" is highlighted, and confirm selection with OK button (3). | "Reset not possible" is shown on the multifunction display (6). | |
16 | Press scroll forwards button (4) until "Confirm" is highlighted, and confirm selection with OK button (3). | "Full service completed" is shown on the multifunction display (6). | |
If the service is not performed or only partly performed after resetting the maintenance computer, then the maintenance computer has to be reset to the default value again | |||
| |||
reset service indicator to previous service. | |||
Deactivation | |||
17 | Press "Exit menu" button (5) repeatedly until standard display (total distance) appears in the multifunction display (6). | ||
18 | Turn key in ignition lock into position "0". |
Referenced documents
- ap0020s0044e Reset service indicator to previous service
- si1800s0013b Service Information: Oil specification