1 | Main menu button |
2 | Accept call button |
3 | OK button |
4 | Scroll forward/back button |
5 | "Back" button |
6 | Multifunction display |
G82.90-0001-75
Dialing | |||
1 | Close doors. | ||
2 | Turn ignition key to position "1". | ||
3 | Press main menu button (1) repeatedly until menu item "Trip" is highlighted in multifunction display (6), and then press OK button (3). | Total distance is displayed. | |
4 | First press and hold down accept call button (2), then within 1 s additionally press OK button (3) and hold for approx. 5_s. | The workshop menu with the following tabs appears in the multifunction display (6): "Vehicle data", "Dynamometer test". "Brake pad replacement" and "ASSYST PLUS". | |
5 | Press scroll forward/back button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with OK button. (3). | ||
6 | Switch on ignition. | The tabs "Service data", "Full service" and "Oil measurement" appear on the multifunction display (6). | |
Read out maintenance data | |||
7 | Select "Service data" tab and confirm with OK button (3). | Note down the service code (e.g. A) which appears in the multifunction display (6). | |
8 | Press scroll forward button (4) repeatedly and read out remaining time, remaining distance and oil data record (e.g. 01 1F 00). | Note down the readout data. | |
Reset service data | |||
9 | Push "Back" (5) button until the multifunction display (6) shows the "Service data" and "Full service" tabs. | ||
10 | Press scroll forward/back button (4) to highlight "Full Service" and confirm selection with OK button. (3). | The current service items are shown on the multifunction display (6). | |
11 | Press scroll forward/back button (4) repeatedly until "Confirm Serv." is highlighted in multifunction display (6) and confirm selection with OK button. (3). | The oil selection or "Service carried out?" appears in the multifunction display (6) | |
12.1 | Select specification of used engine oil using scroll forward/back button (4) and confirm selection with OK button. (3). | Engine 651.9 | |
To achieve the maximum kilometer interval, the engine oil that complies with the Specifications for Operating Fluids, Sheet 228.51, 229.51/.52 must be used and confirmed. | |||
12.2 | Select specification of used engine oil using scroll forward/back button (4) and confirm selection with OK button. (3). | Engine 654.9 | |
To achieve the maximum kilometer interval, engine oil that complies with the Specifications for Operating Fluids, Sheet 229.51/52/71 must be used and confirmed. | |||
12.3 | Select specification of used engine oil using scroll forward/back button (4) and confirm selection with OK button. (3). | Engine 274.9 | |
To achieve the maximum kilometer interval, engine oil that complies with the Specifications for Operating Fluids, Sheet 229.5 must be used and confirmed. | |||
13 | Press scroll forward/back button (4) until "Yes" is highlighted and confirm selection with OK button. (3). | "Reset not possible" is shown on the multifunction display (6). | |
14 | Press scroll forward/back button (4) until "Confirm" is highlighted and confirm selection with OK button. (3). | "Full service completed" is shown on the multifunction display (6). | |
If the service is not performed or only partly performed after resetting the maintenance computer, | |||
| |||
reset the maintenance computer to the default value again. | |||
Reset service indicator to previous service | |||
Deactivation | |||
15 | Press "Back" button (5) repeatedly until standard display (total distance) appears in multifunction display (6). | ||
16 | Switch off ignition. |
Referenced documents
- ap0020s0044e Reset service indicator to previous service