ap0020l0051va

All lines and hoses, sensor cables - checking tightness and condition

Type ap · topic 00.20 · version 0101 · 2004-11-08

Applies to: MODEL 414.700

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.20 Maintenance, service system (FSS, ASSYST) — Series 414 (models 700)

EinPAS 45 Data/information › 45.10 Overall vehicle › 45.10.20 Overall vehicle — Series 414 (models 700)

AP00.20-L-0051VA

All lines and hoses, sensor cables - checking tightness and condition

11.9.01

MODEL 414.700

Check

1

Perform a visual check on all lines and hoses of the brake system and clutch actuation as well as all lines and hoses for oil, fuel, coolant, vacuum lines

Check lines and hoses for leaktightness and damage or other conditions which prevent continued use
(e.g. corrosion, porosity, chafing marks, breakovers, etc.).

If damage or faults are found, seal or replace lines and hoses.

2

Check that all lines and hoses as well as sensor cables for ESP and brake lining wear indicators are installed and secured properly and free of chafing

If any damage and defects are found, route and attach as specified, if necessary replace lines, hoses or cables.