ap0020d0040a

Reset ASSYST maintenance computer

Type ap · topic 00.20 · version 0103 · 2006-12-13

Applies to: MODEL 638.09 /19 /29 with CODE (JW6) Service processor (ASSYST) MODEL 690.6, 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (JW6) Service processor (ASSYST)

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.20 Maintenance, service system (FSS, ASSYST) — Series 638 (models 09*, 19*, 29*) · Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 10 Service › 10.30 Maintenance › 10.30.30 Maintenance — Series 638 (models 09*, 19*, 29*) · Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

AP00.20-D-0040A

Reset ASSYST maintenance computer

15.12.99

MODEL 638.09 /19 /29 with CODE (JW6) Service processor (ASSYST)

MODEL 690.6, 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (JW6) Service processor (ASSYST)

1

Turn the key in the steering wheel lock to position 2

Briefly press "km" button in instrument cluster 2 times.

2

Within the next 10 seconds, turn key in steering wheel lock back to position "0"

3

Press and hold down "km" button

Turn key in steering wheel lock to position 2, continue to hold down "km" button.

The multifunction display then indicates the remaining distance or time.

After approx. 10 seconds an acoustic signal sounds and the new remaining distance or time is displayed.

4

Release the "km" button