an8880p0010ff

Install Brabus side skirts

Type an · topic 88.80 · version 0101 · 2005-10-12

Applies to: MODEL 454.0 (except 454.034)

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.80 Cover strips — Series 454 (models 000, 001, 030, 031, 032, 033)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.3 Retrofitting/modification — Series 454 (models 000, 001, 030, 031, 032, 033)

AN88.80-P-0010FF

Install Brabus side skirts

18.2.04

MODEL 454.0 (except 454.034)

Install Brabus side skirts

P88.80-2091-08

1 Standard side sill protective molding

2 BRABUS side skirts

4 Lugs

3 Clip

Remove

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle.

2

Remove left and right standard side sill protective molding (1)

Remove/install side sill protective molding

AR88.80-P-1050FF

Install

3

Check that BRABUS side skirts (2) is matched correctly and then paint

4

Clean gluing surface on BRABUS side skirts (2)

Bonding surface must be free of dust and grease.

5

Fit BRABUS side skirts (2) to vehicle and fasten with clips (3) on left and right

6

Clip in expansion clips (arrows) from bottom

7

Remove protective foil from BRABUS side skirts (2)

Carefully remove protective foil from lugs (4) in horizontal direction to prevent lugs (4) from being torn off prematurely

8

Press on BRABUS side skirts (2)

Ensure that BRABUS side skirts (2) is seated properly.

9

Lower vehicle

10

Place certificate in vehicle

Certificate included in scope of delivery

11.1

Add special equipment to the vehicle data card and to the online vehicle data card

At workshops without DMS Autoline 8.0 dealer system.

Code (E71) BRABUS side skirts

Referenced documents