an8285p0010ew

Retrofit COMAND remote control

Type an · topic 82.85 · version 0101 · 2015-09-01

Applies to: Model 212.1## 1# with code 512 (COMAND APS with DVD changer) except code 864 (Rear compartment entertainment package) Model 212.1## 1# with code 527 (COMAND APS with single DVD drive (with navigation)) except code 864 (Rear compartment entertainment package)

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.85 Navigation and Communication system — Series 212 (models 1**)

EinPAS 31 Communication/information/entertainment › 31.60 Operation/controller/on-board computer › 31.60.3 Retrofitting/modification — Series 212 (models 1**)

AN82.85-P-0010EW

Retrofit COMAND remote control

13.08.2015

Model

212.1## 1#

with code 512 (COMAND APS with DVD changer)

except code 864 (Rear compartment entertainment package)

Model

212.1## 1#

with code 527 (COMAND APS with single DVD drive (with navigation))

except code 864 (Rear compartment entertainment package)

Install

1

Remove battery compartment cover from COMAND remote control, insert batteries included in the package contents into COMAND remote control and close battery compartment cover again

2

Place COMAND remote control at suitable position in vehicle

Update Vehicle Documentation (VeDoc)

3

Enter special equipment in on-line vehicle data card

Code 816 (Entertainment remote control)

4

Attach note "Remote control retrofitted as per AN82.85-P-0010EW" under field organization texts to design group 82

5

Connect diagnostic system and select vehicle via the vehicle identification number (VIN)

AD00.00-P-2000-04A

6

Carry out variant coding using software calibration number (SCN)

"Head unit"

7

Disconnect diagnostic system

AD00.00-P-2000-04A

Check

8

Perform function test

See Owner's Manual.

Parts ordering note

Part no.

Designation

Quantity

KG 99 (siehe EPC)

Scope of delivery for COMAND remote control

1

Referenced documents