an8285p000501ec
Install additional fan for COMAND
Type an · topic 82.85 · version 0103 · 2013-07-15
Applies to: MODEL 204.0##/2## 1# as of 3/1/11 MODEL 204.3## 1# MODEL 207.3##/4## 1# up to 5/31/13 up to model year 2014
Where it sits
Function group 3 Body › 82 Electrical system, body › 82.85 Navigation and Communication system — Series 204 (models 0**, 2**, 3**) · Series 207 (models 3**, 4**)
EinPAS 31 Communication/information/entertainment › 31.10 Head unit › 31.10.3 Retrofitting/modification — Series 204 (models 0**, 2**, 3**) · Series 207 (models 3**, 4**)
AN82.85-P-0005-01EC
| Install additional fan for COMAND
|
|
|
MODEL
| 204.0##/2## 1# as of 3/1/11
|
MODEL
| 204.3## 1#
|
MODEL
| 207.3##/4## 1# up to 5/31/13
|
|
| up to model year 2014
|
Number
| Designation
|
| MODEL 204
| MODEL 207
|
BA46.10-P-1002-03Q
| Upper bolt, steering column tube to crossmember below instrument panel
| Nm
| 26
| 26
|
Number
| Designation
|
| MODEL 204
| MODEL 207
|
BA46.10-P-1001-03Q
| Lower bolt, steering column tube to crossmember below instrument panel
| Nm
| 26
| 26
|
1
| Unclip electrical connector (4) from steering column tube (1).
|
2
| Remove bolts (2, 3) and place steering column tube (1) in driver footwell.
|
3
| Position COMAND fan motor (M4/13) at supports (8) on air conditioner housing (7) and secure with screws/bolts (5).
|
4
| Clip plug (6) of COMAND fan motor (M4/13) into bracket (9) on air conditioner housing (7).
|
5
| Screw on steering column tube (1) again with screws/bolts (2, 3).
|
|
| Observe tightening torque.
|
6
| Clip electrical connector (4) onto steering column tube (1).
|
