Shown with CODE EN0 (Sound 5 radio) |
3 | Cover |
4 | Stowage compartment |
7 | Cover |
D68.10-1156-02
Example illustration |
8 | Microphone |
9 | Sound 40 PRO radio |
10 | Telephone box |
11 | Global positioning system (GPS)/global system mobile (GSM) window antenna |
12 | GPS/GSM antenna transmitter |
D82.60-1108-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Remove cover (3) | To do so, use a long wedge to carefully unclip cover (3), starting at the top. Disconnect electrical connector from covering (3) and remove covering (3). | |
Long wedge | |||
2 | Remove covers (7) of air vents at instrument panel center part | ||
| |||
3 | Unclip left A-pillar trim | ||
4 | Remove cover below steering wheel | ||
| |||
5 | Remove driver-side footwell ventilation | The footwell ventilation is secured by a bolt. | |
6 | Unclip stowage compartment (4) | The stowage compartment (4) is a dispensable part. | |
7.1 | Detach blind cover from installation frame | Model 906 | |
7.2 | Remove radio/radio with navigation | Model 906 | |
| Model 906 | ||
To do so, remove the screws/bolts, pull out the radio/radio with navigation and disconnect the electrical connectors and antenna connections. | |||
8 | Remove CAN wiring harness for vehicle-side radio connector installed ex-works | Model 906 | |
To do so, unplug CAN line Low and CAN line High from vehicle-side radio connector plug at pins 6 and 7 and disconnect from interior CAN electrical connector. | |||
| Install | ||
9 | Refrofit installation frame for DIN slot (2-slot) | Model 906 | |
The removed installation frame is a dispensable part. | |||
10 | Retrofit GPS/GSM window antenna (11) and GPS/GSM antenna radiator (12) | ||
Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |||
11 | Retrofit microphone (8) of hands-free system | ||
12 | Retrofit telephone box (10) | ||
13 | Connect antenna line of GPS/GSM window antenna (11) to telephone control unit | The telephone control unit is in the telephone box (10). | |
14 | Connect microphone line of hands-free system at Sound 40 Pro radio (9) | ||
15 | Connect line of telephone control unit at Sound 40 Pro radio (9) | ||
16 | Connect electrical connectors and antenna line to Sound 40 Pro radio (9) | ||
17 | Retrofit Sound 40 Pro radio (9) in upper DIN slot | ||
18 | Install driver-side footwell ventilation | The footwell ventilation is secured by a bolt. | |
19 | Install cover below steering wheel | ||
| |||
20 | Install covers (7) of air vents at instrument panel center part | ||
| |||
21 | Connect electrical connector to covering (3) | ||
22 | Clip in cover (3) | ||
| Check | ||
23 | Check Sound 40 Pro radio (9) for proper function |
115 589 03 59 00
Long wedge
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- an6810d4685a Retrofit DIN-slot (2-slots)
- an8261d740501a Retrofit GPS/GSM antenna
- an8261d740502a Retrofit the telephone box
- an8270d896904a Retrofit hands-free system microphone
- ar6810d1585a Remove/install air outlet covering on instrument panel center part
- ar6810d1590a Remove/install cover below steering wheel
- ar8260d7502b Remove/install radio