Retrofit electrical preinstallation for rental vehicles

AN82.25-P-2000P

Retrofit electrical preinstallation for rental vehicles

4.10.07



Removing

1

Move wiper linkage to repair position

2.1

Remove radio



With code 750 MB Audio 30 RDS radio,

with code 753 MB Audio 10 RDS radio,

With code 756 MB Audio 10 CD radio with VK/RDS.

AR82.60-P-7502P

2.2

Remove radio and APS navigation control panel



with code 353 Audio 30 APS.

AR82.61-P-7412P

2.3

Remove operating / display unit with control unit



With code 352 COMAND operating and display system.

AR82.85-P-7472P

3

Remove left and right front floor covering



Remove/install front floor covering (left)

AR68.20-P-2050P



Remove/install front floor covering (right)

AR68.20-P-2070P

4

Remove cover below dashboard on left and right



Remove/install cover below instrument panel (left)

AR68.10-P-1500P



Remove/install cover below instrument panel (right)

AR68.10-P-1520P

5

Remove right rear door sill molding

6

Fold forward rear seat cushion

7.1

Fold rear seat backrest forward

With code 287 Through-loading feature.

7.2

Remove rear seat backrest



Except code 287 Through-loading feature.

AR91.12-P-1620PC

8.1

Remove right side bolster from rear seat backrest



With code 287 Through-loading feature.

AR91.12-P-1710P

9

Remove right side trim panel from luggage compartment



AR68.30-P-4600P

10

Remove right front footrest

 ETC [EGS] control unit remains connected.

11

Remove dashboard



AR68.10-P-1000P

12

Remove front SAM control unit with fuse and relay module (N10/1)

 Do not disconnect lines.



AR54.21-P-1260P



Install

13

Retrofitting taxi cockpit wiring harness

AN82.25-P-1000-07P

14

Retrofit wiring harness for taxi frame floor system

AN82.25-P-1000-01P

15

Install special vehicle multifunction control unit (SVMCU [MSS]) (N26/9)

AN82.25-P-1000-03P

16

Retrofit emergency alarm system activate button (S62/6)

AN82.25-P-1000-11P

17

Retrofit emergency alarm system cancel button (S62/5)

AN82.25-P-1000-10P

18

Install front SAM control unit with fuse and relay module (N10/1)



AR54.21-P-1260P

19

Installing instrument panel



AR68.10-P-1000P

20

Install right front footrest

21

Install right side trim panel into luggage compartment



AR68.30-P-4600P

22

Install right side bolster into rear seat backrest



With code 287 Through-loading feature.

AR91.12-P-1710P

23.1

Install rear seat backrest



Except code 287 Through-loading feature.

AR91.12-P-1620PC

23.2

Fold back rear seat backrest

With code 287 Through-loading feature.

24

Fold back rear seat cushion

25

Install right rear door sill molding

26

Install cover below dashboard on left and right



Remove/install cover below instrument panel (left)

AR68.10-P-1500P



Remove/install cover below instrument panel (right)

AR68.10-P-1520P

27

Install left and right front floor covering



Remove/install front floor covering (left)

AR68.20-P-2050P



Remove/install front floor covering (right)

AR68.20-P-2070P

28.1

Install operating and display unit with control unit



With code 352 COMAND operating and display system.

AR82.85-P-7472P

28.2

Install APS [auto pilot system] radio and navigation operating unit



With code 353 Audio 30 APS.

AR82.61-P-7412P

28.3

Install radio



With code 750 MB Audio 30 RDS radio,

with code 753 MB Audio 10 RDS radio,

with code 756 MB Audio 10 CD radio with VK/RDS.

AR82.60-P-7502P

29

Conduct start up of taxi functions

 The startup of taxi functions is also valid for a rental car.

AN82.25-P-1000-05P



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

30

Supply the new operating instructions with the rental car

31

Enter designations of relevant special equipment onto vehicle data card and in vehicle documentation system

 Code 965 Rental vehicle electric preinstallation.

Part no.

Designation

Quantity

KG 54

Wiring harnesses

1

KG 82

Parts for rental vehicle retrofitting

1