Retrofit cargo retaining net · an6850p0010ab · Mercedes-Benz WIS

AN68.50-P-0010AB

Retrofit cargo retaining net

27.2.12

MODEL 463.230 ## as of 105044,
463.232 /240,
463.330 ## as of 105044

P68.50-2040-09

1 Cargo retaining net

2 Bracket

3 Bracket

4 Drilling template

a 50 mm

b 20 mm

c 40 mm

d 40 mm

5 Front bolt of handle

6 Upper lashing eye

7 Lower lashing eye

	Remove
1	Remove handle in rear on right and left
	Install
2	Fabricate template (4) for cargo retaining net		AN68.50-P-0010-02B
3	Fasten template (4) with front bolt of handle (5) and align in relation to headliner	 Perform work on left side of vehicle
4	Drill openings	Ø 11 mm
5	Insert bracket (2) with bushing into openings and tighten	 Use Loctite 243 sealant.	*BR00.45-Z-1133-02A
6	Insert bracket (3) into hole with bushing and tighten	 Use Loctite 243 sealant.	*BR00.45-Z-1133-02A
7	Repeat steps 3 and 6 on right side of vehicle
8	Install handle in rear on right and left
9	Install upper lashing eye (6) on left and right wheelhouse	 Cut open floor covering as shown in figure and remove plug.Use Loctite 243 sealant.	*BR00.45-Z-1133-02A
10	Install lower lashing eye (7) on left and right wheelhouse	 Cut open floor covering as shown in figure and remove plug. Use Loctite 243 sealant.	*BR00.45-Z-1133-02A
11	Install cargo retaining net (1)	 See Operating Instructions

Repair materials

Number	Designation	Order number
BR00.45-Z-1133-02A	Loctite 243	A 613 989 09 71

Parts ordering notes

Part no.	Designation	Quantity
A 463 860 03 74	Parts kit for cargo retaining net	1