P86.10-2029-09
| Installing | ||
1 | Insert equipment compartment (2) and weapons compartment (1) into load compartment | Weapons compartment (1) without foam insert. The precise position of the weapons compartment (1) depends on the dent of the equipment compartment (2). | |
2 | Mark holes on loading floor | Use weapons compartment (1) as drilling template. | |
3 | Remove loading floor and drill holes | ||
4 | Insert punch-in nuts | ||
5 | Tighten screws included from loading floor side | Front screw M8x35, rear screw M8x40. | |
6 | Fasten check strap (1a) at right rear of load retainer | ||
7 | Insert weapons compartment (1) and fasten with knurled screws (1b) | Move check strap (1a) through weapons compartment opening (1) and screw to weapons compartment. | |
8 | Insert foam insert into weapons compartment (1) | ||
9 | Insert equipment compartment (2) into load compartment |
Parts ordering notes
Part no. | Designation | Quantity |
A 202 840 00 65 | Check strap | 1 |
A 202 840 10 62 | Weapons compartment with mounting material | 1 |
HKW 202 841 M000 | Equipment compartment bottom section | 1 |
HKW 202 841 M001 | Equipment compartment top section | 1 |