an6830p000102a

Modify roof paneling for installing handle and clamping strap mount

Type an · topic 68.30 · version 0102 · 2002-10-23

Applies to: MODEL 163.113 /154 #A up to 289564, 163.113 /154 #X up to 754619, 163.136 /172 with CODE (847) 3rd seat row

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 163 (models 113, 136, 154, 172)

EinPAS 37 Interior equipment › 37.55 Stowage/container/holder › 37.55.3 Retrofitting/modification — Series 163 (models 113, 136, 154, 172)

AN68.30-P-0001-02A

Modify roof paneling for installing handle and clamping strap mount

Model 163.113 /154 #A up to 289564, #X up to 754619

Model 163.136/ 172

with code (847), 3rd seat row

Handles

Number

Designation

MODEL Series 163

BA68.70-P-1001-02A

Screw for pivot handle/mount on roof frame

Nm

2.5

Modify roof paneling for installing handle and clamping strap mount

P68.30-2055-10

1 Remove clothes hook and accessory hook.

2 Position template (1) to roof paneling.

Fasten template with adhesive tape.

3 Mark points which must be cut out for installing the handle.

4 Remove template (1).

5 Cut out cutouts for handle.

Modify roof paneling for installing handle and clamping strap mount

P68.30-2170-10

Only on vehicles with safety standard FMVSS201.

6.1 Install shock absorber (5).

Danger of cracks. Carefully pull roof paneling downward and install shock absorber between roof paneling and roof frame.

The flat side of the shock absorber (5) points in the direction of the roof frame.

Modify roof paneling for installing handle and clamping strap mount

P68.30-2056-10

7 Install accessory hook (2), clamping strap mount (3) and pivot handle (4).

On vehicles with FMVSS201 install special clamping strap mounts and pivot handles with screws (6) .

8 Repeat on opposite side.