an6830p000101a

Modify paneling on D-pillar

Type an · topic 68.30 · version 0102 · 2002-10-23

Applies to: MODEL 163.113 /154 #A up to 289564, 163.113 #X up to 754619, 163.154 #X up to 716524, 163.136 /172

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 163 (models 113, 136, 154, 172)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.3 Retrofitting/modification — Series 163 (models 113, 136, 154, 172)

AN68.30-P-0001-01A

Modify paneling on D-pillar

MODEL 163.113 /154 #A up to 289564,
163.113 #X up to 754619,
163.154 #X up to 716524,
163.136 /172

Modify paneling on D-pillar

When working ensure that the seatbelt is correctly installed, operates properly and that damage to the outer paneling surface is prevented.

1 Glue hole template (2) for seatbelt onto D-pillar paneling (1).

Position edge of template to edge of paneling.

2 Mark dimensions of oblong hole (3) on D-pillar paneling (1).

3 Remove hole template (2).

4 Cut out oblong hole (3) for seatbelt.

5 Debur hole edges with P240 sand paper.

6 Polish hole edges with P600 sand paper.

To avoid possible chafing of the seatbelt, a uniform smooth surface is required.

7 Repeat on opposite side.

P91.12-2053-03