Model | 207.3## 1# up to 5/31/13 |
up to model year 2014 | |
with code 512 (COMAND APS with DVD changer) | |
except code 460 (Canada version) | |
except code 494 (US version) | |
except code 498 (Japanese version) | |
Model | 207.3## 1# up to 5/31/13 |
up to model year 2014 | |
with code 527 (COMAND APS with single DVD drive (with navigation)) | |
except code 460 (Canada version) | |
except code 494 (US version) | |
except code 498 (Japanese version) |
220 589 04 99 00
New passenger car wiring harness repair kit
000 589 13 99 00
Wiring harness repair kit, basic
Routing diagram |
2 | Electrical line |
3 | Electrical line |
A40/3 | COMAND control unit |
B84/3 | Backup camera |
B84/3x1 | Backup camera electrical connector |
E4/1e3 | Right backup lamp |
N10/2 | Rear SAM control unit with fuse and relay module |
N66/10 | Backup camera voltage supply module |
W7 | Right wheelhouse trunk ground point |
br | Brown line |
gr/ge | Gray/yellow line |
rt/bl | Red/blue line |
P54.65-4030-11
Connection scheme |
2 | Electrical line |
3 | Electrical line |
A40/3 | COMAND control unit |
B84/3 | Backup camera |
B84/3x1 | Backup camera electrical connector |
E4/1e3 | Right backup lamp |
N10/2 | Rear SAM control unit with fuse and relay module |
N66/10 | Backup camera voltage supply module |
W7 | Right wheelhouse trunk ground point |
br | Brown line |
gr/ge | Gray/yellow line |
rt/bl | Red/blue line |
P54.65-4031-11
1 | Route electrical line of reversing camera (B84/3) through specified opening into interior of trunk lid and clip reversing camera (B84/3) into place. |
2 | Detach protective foil (4) from reversing camera (B84/3). |
P54.65-4034-12
3 | Place wiring harness for reversing camera into trunk. |
4 | Connect black, 4-pin connector and white, 6-pin connector to reversing camera power supply module (N66/10). |
5 | Route electrical line (2) and gray/yellow line (GY/YE) along existing wiring harnesses to the right side of the trunk lid and fix in place with cable ties. |
Route gray/yellow line (GY/YE) and electrical line (2) between trunk lid hinge and left rear wheel well with sufficient clearance. |
6 | Route brown line (BN) and red/blue line (RD/BU) along existing wiring harnesses to the rear SAM control unit with fuse and relay module (N102) and fix in place with cable ties. |
P54.65-4035-11
7 | Route electrical line (2), as shown, to the reversing camera and fix in place on existing wiring harnesses with cable ties. |
8 | Make electrical connector for reversing camera (B84/3x1). |
To do this, connect black 4-pin coupling of electrical line (2) and black 4-pin connector of reversing camera. |
P54.65-4036-12
9 | Route gray/yellow line (GY/YE) along existing wiring harnesses to right backup lamp (E4/1e3) and fix in place with cable ties. |
10 | Connect gray/yellow line (GY/YE) of wiring harness for reversing camera to gray/yellow line (GY/YE) of right backup lamp (E4/1e3) using potential distributor (8). |
The potential distributor (8) is available in the Basic wiring harness repair kit or the Supplement wiring harness repair kit for passenger cars. |
11 | Wrap felt tape round potential distributor (8). |
P54.65-4038-12
12 | Detach green fuse holder (7) from rear SAM control unit with fuse and relay module (N10/2). |
13 | Mount red/blue line (RD/BU) into contact cavity 4 of green fuse holder (7). |
14 | Insert 7.5 A fuse (10) into green fuse holder (7). |
15 | Attach green fuse holder (7) onto rear SAM control unit with fuse and relay module (N10/2). |
16 | Connect brown line (BN) to right wheel arch ground point in trunk (W7) Connecting. |
P54.65-4037-12
17 | Route electrical line (3) from power supply module for reversing camera (N66/10), starting in trunk, into cable ducts along existing wiring harnesses to the A-pillar and fix in place. |
P54.65-4039-11
18 | Route electrical line (3) from A-pillar along existing wiring harnesses to COMAND controller unit (A40/3) and fix in place. |
P54.65-4040-11
19 | Connect green 2-pin connector (9) of electrical line (3) to green slot of COMAND controller unit (A40/3). |
P54.65-4029-12