Retrofit ultrasonic backup assist

AN54.65-P-0010B

Retrofit ultrasonic backup assist

14.2.12



Remove

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground cable of battery



 Except model 463.241 with special protection version code 979

AR54.10-P-0003G

 Model 463.241 with special protection version code 979, special protection version FB4 code ZS4, special protection version FB6 code ZS6, special protection version FB7 code ZS7, additional battery 100 Ah incl. cutoff relay code E26

AR54.10-P-0003PV



Notes on battery

AH54.10-P-0001-01A

2

Remove rear bumper corners



AR88.20-P-0010G

3

Remove license plate illumination

 License plate illumination is clipped into bumper.

4

Remove rear pillar panel



Install

5

Install BA [RFH] warning indicator (A44/1)

AN54.65-P-0010-01A

6

Install sensors in rear bumper

AN54.65-P-0010-03A

7

Install bumper corners



AR88.20-P-0010G

8

Install sensor cable

AN54.65-P-0010-02B

9.1

Assemble wiring harness of backup assist cutoff

 Only with 13-pin trailer socket code E43

AN54.65-P-0010-06B

10.1

Convert 13-pin trailer hitch socket

 Only with 13-pin trailer socket code E43

AN54.65-P-0010-05B

11

Install BA [RFH] control unit (N62)

AN54.65-P-0010-04B

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

12

Reconnect ground lead to battery



 Except model 463.241 with special protection version code 979

AR54.10-P-0003G

 Model 463.241 with special protection version code 979, special protection version FB4 code ZS4, special protection version FB6 code ZS6, special protection version FB7 code ZS7, additional battery 100 Ah incl. cutoff relay code E26

AR54.10-P-0003PV



Notes on battery

AH54.10-P-0001-01A

13

Install rear pillar panel

14

Install license plate illumination

15

Carry out function check of ultrasonic backup assist

Part no.

Designation

Quantity

KG82 (see EPC)

Parts see Parktronic system

1