an5461d2000ts

Retrofit digital tachograph (DTCO)

Type an · topic 54.61 · version 0101 · 2019-04-05

Applies to: Model 907, 910 with code JV6 (Tachograph pre-installation kit)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.61 Speed recorder, trip recorder, taximeter — Series 907 · Series 910

EinPAS 31 Communication/information/entertainment › 31.35 Tachograph/toll system › 31.35.3 Retrofitting/modification — Series 907 · Series 910

AN54.61-D-2000TS

Retrofit digital tachograph (DTCO)

05.04.2019

Model

907, 910

with code JV6 (Tachograph pre-installation kit)

Retrofit digital tachograph (DTCO)

2

Cover (code FF8 (1-DIN slot at front under roof lining))

3

Cover (code FE9 (1-DIN slot under cockpit, passenger side))

D54.61-1177-06

Retrofit digital tachograph (DTCO)

Shown on model 907 with code FF8 (1-DIN slot at front under roof lining)

1

Digital tachograph

4

Device installation slot (code FF8 (1-DIN slot at front under roof lining))

5

Electrical connectors

D54.61-1178-12

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove

1.1

Remove cover (2).

Model 907, 910 with code FF8 (1-DIN slot at front under roof lining) except code FE9 (1-DIN slot under cockpit, passenger side)

The cover (2) is no longer required and must be disposed of properly.

1.2

Remove cover (3).

Model 907, 910 with code FE9 (1-DIN slot under cockpit, passenger side) except code FF8 (1-DIN slot at front under roof lining)

The cover (3) is no longer required and must be disposed of properly.

Install

2

Connect electrical connectors (5) with digital tachograph (1).

3

Replace buffer battery of digital tachograph (1).

AR54.61-D-0009TS


When replacing the buffer battery, the power supply from the vehicle must be guaranteed.
Otherwise commissioning of the digital tachograph (1) is not possible.

Do not install the digital tachograph (1) yet.

4

Retrofit digital tachograph (1).

Fit digital tachograph (1) to device installation slot (4) and press in until it latches noticeably into place.

5

Enter special equipment into online vehicle data card.

Designation of relevant special equipment: "Code JD2 (EU digital tachograph, with download capability)" or code J19 (Tachograph, 1 day/2 drivers, automatic (EC)).

Delete existing code JV6 (Pre-installation for tachograph).

6

Carry out SCN coding on electronic ignition lock control unit (EZS).

AR54.21-D-0015TS

Do not yet remove vehicle diagnosis system.

7

Carry out SCN coding on instrument cluster (IC) control unit.

AR54.21-D-0015TS

Do not yet remove vehicle diagnosis system.

8

Have initial calibration performed by authorized personnel.

Observe the operator's manual included with the digital tachograph (1).

9

Remove vehicle diagnosis system.

AD00.00-D-2000-06TS

Check

10

Perform tachograph inspection.

Observe national legal requirements for tachograph testing. In the Federal Republic of Germany, perform the tachograph inspection as per Art. 57b of the German Regulations Authorizing the Use of Vehicles for Road Traffic (StVZO).

Parts ordering note

Part no.

Designation

Quantity

Parts kit for digital tachograph (see ODUS)

1

Referenced documents