AN01.00-P-0006FF | Retrofit performance kit BRABUS | 24.2.04 |
ENGINE 135.950 in MODEL 454.0
except CODE (E50) Trailer hitch
with CODE (F04) Sport exhaust system, Brabus (DFO)
P01.00-2653-06
1 Sticker
2 Engine cover
3 Sticker
4 Sticker
5 Bracket
N3/10 Motor electronics control unit
| Removing/installing | ||
| Retrofitting of this performance kit causes the engine output to increase from 80 kW (109 HP) to 90 kW (122 HP) | ||
1 | Replace camshafts and valve springs | Installation: The camshafts and valve spring from the parts kit hardware performance kit SB3 must be used. | |
| Removing/installing valve springs (cylinder head installed) | ||
2 | Install in reverse order | ||
3 | Glue sticker (1) onto the engine cover (2) | The surface to be glued must cleaned and free of grease. | |
4 | Glue sticker (3) onto the motor electronics control unit (N3/10) | The surface to be glued must cleaned and free of grease. | |
5 | Glue sticker (4) onto the bracket (5) for the motor electronics control unit (N3/10) | The surface to be glued must cleaned and free of grease. | |
6 | Program the BRABUS software (SB3) | Programming of the software (SB3) is only possible after releasing using a TAN (transaction number). The order form for releasing is obtainable from the Market Performance Center. | |
| Connect up STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
7 | Put the expert's report in the vehicle | Receive the expert's report in the package contents or print out expert's report new. | |
8.1 | Enter special equipment in the vehicle data card and in the vehicle's online data card | Only for workshops with a dealer system DMS Autoline 8.0 | |
Code (13Z) performance kit 3 Brabus. |
Commercially available tools
Referenced documents
- ad0000p200004ff Connect STAR DIAGNOSIS, read out fault memory
- ar0530p3030ff Remove/install valve springs (cylinder head installed)