AD83.25-P-3000A | Automatic heater (HEAT) diagnosis operational check | 6.11.97 |
MODEL 170 except CODE (580) air conditioning, or for USA, Tempmatic
Automatic heater (HEAT) diagnosis, basic knowledge | |||
Prerequisites for function check, HEAT | |||
Function check | |||
Test step/Scope of test | Operation/Requirement | Specified value | Possible cause/Remedy |
1 No heat | Selectors on "blue" (engaged) | Air outlets, unheated air | |
2 Full heat | Selectors on "red" (engaged) | Side outlets, heated air Center outlet, unheated air | |
3 Recirculated air | Selectors in any position Recirculated air button pressed (LED illuminated) | Volume of air from center outlet increases significantly. | |
4 Normal setting in control mode | Set preselected temperature to interior temperature | Center outlet, unheated air Other air outlets, temperature-controlled air outlet At the same time the duo valve (Y21) cycles and the coolant circulation pump (M13) runs. |
Referenced documents
- ad8325p200009a HEAT preconditions for operational test
- ad8325p2000a Automatic heater (HEAT) diagnosis previous knowledge
- ad8325p600005a HEAT test of electrical system heat exchanger temperature sensor
- ad8325p600005b HEAT test of electrical system heat exchanger temperature sensor
- ad8325p600014a HEAT test of electrical system pushbutton control module
- ad8325p600014b HEAT test of electrical system pushbutton control module
- ad8325p600014c HEAT test of electrical system pushbutton control module
- ad8325p600015a HEAT test of electrical system blower controller
- ad8325p600016b HEAT test of electrical system duovalve
- ad8325p600017a HEAT test of electrical system fresh air / recirculated air flap switchover valve
- ad8325p8000a Automatic heater (HEAT) test of pneumatic system