ad8264s2000a

CD player with changer (CDC), diagnosis, basic knowledge

Type ad · topic 82.64 · version 0100 · 2003-06-13

Applies to: MODEL 638 with CODE (EP5) CD changer

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.64 CD changer — Series 638

AD82.64-S-2000A

CD player with changer (CDC), diagnosis, basic knowledge

11.4.97

MODEL 638 with CODE (EP5) CD changer

	Connecting and using test equipment		AD00.00-S-1000AZ
	Control of the CD player with changer is described in the operating instructions for the MB radio
	3-inch CD's cannot be played with this CD player.
	CD's which have distorted due to the effect of heat, should not be inserted into the CD magazine. Do not use force when removing CD magazine. Insert only one CD in each compartment in the CD magazine. An attempt to insert two CD's can lead to damage. Insert CD's in proper direction (writing down).
	The CD changer can be damaged if a CD is in the drive when the magazine is removed.
	To avoid damage to the CD changer ensure that connectors are connected and disconnected only with the ignition switched off. If a malfunction is indicated check the cables, fuses, plugs and connectors for discontinuity, good contact and proper connection according to the valid wiring diagram.		PE82.00-S-1100A
	Wiring diagrams		PE82.00-S-1100A
	Tools for electrical test on CD player with changer		AD82.64-P-2000-01A
	Radio connections, electrical test on radio (RD)		AD82.60-S-2000-02A
	Removing CD magazine on CD player with changer		AD82.64-S-2000-03A
	Location of CD player with changer		GF82.64-S-3113-01A

Referenced documents

ad0000s1000az Connection and use of testing equipment
ad8260s200002a Radio (RD), testing electrical system, radio connections
ad8264p200001a Tools, testing electrical system, CD player with changer
ad8264s200003a CD player with changer (CDC), removing CD magazine
gf8264s311301a CD player with changer, location
pe8200s1100a Survey of wiring diagrams electrical system, body