Carry out programming in the following sequence:
a Switch off all electric consumers.
b Switch off ignition (for at least 15 s).
c Actuate clutch pedal and hold.
d At the same time hold shift lever in neutral position.
e Switch on ignition.
The programming process lasts approx. 15 seconds.
– The driver or customer should also be informed of how the programming process is started.
– Re-programme in the event of undervoltage (fault code 93) or jump-starting. With undervoltage programming should take place with jump-starting batteries.
– If programming cannot be started, check clutch sensor (fault code 96).