Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
1.0 | Voltage supply Circuit 30A | N57 10 21 (A.10) (A.21) | Ignition: OFF | 11 - 14 V | 1.1, Circuit 31A. |
1.1 | Circuit 30A | N57 21 (A.21) | Ignition: OFF | 11 - 14 V | Circuit 30A. |
2.0 | Voltage supply Circuit 30B | N57 62 53 (B.21) (B.12) | Ignition: OFF | 11 - 14 V | 2.1, Circuit 31B. |
2.1 | Circuit 30B | N57 53 (B.12) | Ignition: OFF | 11 - 14 V | Circuit 30B. |
3.0 | Voltage supply Circuit 30E | N57 11 16 (A.11) (A.16) | Ignition: OFF | 11 - 14 V | 3.1, Circuit 31E. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
3.1 | Circuit 30E | N57 16 (A.16) | Ignition: OFF | 11 - 14 V | Circuit 30E. |
4.0 | Voltage supply Circuit 15R | N57 10 8 (A.10) (A.8) | Ignition lock in position 1 | 11 - 14 V | Circuit 15R, Circuit 31A. |
5.0 | Front door contact switches (S17/3, S17/4) circuit | N57 10 9 (A.10) (A.9) | Pull fuse (F3-17) Ignition: OFF Front doors: Closed Left front door: OPEN (right front door closed). Right front door: OPEN (left front door closed). | 11 - 14 V <2 V <2 V | Wiring, Left door switch (S17/3), Right door switch (S17/4), CF control module (N57), ATA control module (N26), PSE control module (A37 or A37/1). Wiring, 5.1. Wiring, 5.1. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
5.1 | S17/3, S17/4 |
N57 10 9 (A.10) (A.9) | Ignition: OFF Overhead console: all switches in OFF position. Disconnect connector 1 of A37 or A37/1. Disconnect connector A of N57. All doors: CLOSED |
11 - 14 V |
Wiring, 5.2, 5.3. |
5.2 | S17/3 | N57 10 9 (A.10) (A.9) | See 5.1 Disconnect S17/4 connector. | 11 - 14 V | Wiring, S17/3. |
5.3 | S17/4 | N57 10 9 (A.10) (A.9) | See 5.1 Disconnect S17/3 connector. | 11 - 14 V | Wiring, S17/4. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
6.0 | Sliding/pop-up roof circuit (S13/2) Function: Closing sliding/pop-up roof | N57 10 30 (A.10) (C.3) | Ignition: ON S13/2: Rest position. Press and hold in close position. |
<1 V 11 - 14 V Sliding/pop-up roof closes. | Wiring, 6.1, 6.2. Wiring, 6.1, 6.2. Sliding/pop-up roof motor (M12m1), Sliding/pop-up roof relay (M12k1). |
6.1 | S13/2 |
N57 28 30 (C.1) (C.3) | Ignition: OFF Disconnect connector C from N57. S13/2: Rest position. Press and hold sun roof in close position. Press and hold pop-up roof in close position. |
>20 kW <1 W <1 W |
Wiring, S13/2. Wiring, S13/2. Wiring, S13/2. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
6.2 | S13/2, N57 | N57 10 28 (A.10) (C.1) | Ignition: ON | 11 - 14 V | Wiring, 6.3. |
6.3 | N57 | N57 10 28 (A.10) (C.1) | Ignition: OFF Disconnect connector C of sliding/pop-up roof wiring harness from test cable ( 22, Figure 1). Ignition: ON |
11 - 14 V |
N57. |
7.0 | Sliding/pop-up roof circuit (S13/2) Function: Opening sliding roof | N57 10 31 (A.10) (C.4) | Ignition: ON S13/2: Rest position. Press and hold sliding roof in open position. |
<1V 11 - 14 V Sliding roof opens. | Wiring, 7.1, 7.2. Wiring, 7.1, 7.2. Sliding/pop-up roof motor (M12m1), Sliding/pop-up roof relay (M12k1). |
Electrical Test Program - Test
Test step DTC | Scope of test | Test connection | Test condition | Nominal value | Possible cause/remedy |
7.1 | S13/2 | N57 28 31 (C.1) (C.4) | Ignition: OFF Disconnect connector C from N57. S13/2: Rest position. Press and hold sliding roof in open position. |
>20 kW <1 W | Wiring, S13/2. Wiring, S13/2. |
7.2 | S13/2, N57 | N57 10 28 (A.10) (C.1) | Ignition: ON | 11 - 14 V | Wiring, 7.3. |
7.3 | N57 |
N57 10 28 (A.10) (C.1) | Ignition: OFF Disconnect connector C of sliding/pop-up roof wiring harness from test cable ( 22, Figure 1). Ignition: ON |
11 - 14 V |
N57. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
8.0
| Sliding/pop-up roof circuit (S13/2) Function: Opening pop-up roof | N57 10 29 (A.10) (C.2) | Ignition: ON S13/2: Rest position. Press and hold pop-up roof in open position. |
<1 V 11 - 14 V Pop-up roof opens. | Wiring, 8.1, 8.2. Wiring, 8.1, 8.2. Sliding/pop-up roof motor (M12m1), Sliding/pop-up roof relay (M12k1). |
8.1 | S13/2 | N57 28 29 (C.1) (C.2) | Ignition: OFF Disconnect connector C from N57. S13/2: Rest position. Press and hold pop-up roof in open position. |
>20 kW <1 W |
Wiring, S13/2. Wiring, S13/2. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
8.2 | S13/2, N57 | N57 10 28 (A.10) (C.1) | Ignition: ON | 11 - 14 V | Wiring, 8.3. |
8.3 | N57 | N57 10 28 (A.10) (C.1) | Ignition: OFF Disconnect connector C of sliding/pop-up roof harness from test cable ( 22, Figure 1). Ignition: ON |
11 - 14 V |
N57. |
9.0 | USA/ECE model recognition 1) | N57 33 34 (D.2) (D.3) | Ignition: OFF Disconnect connector D from N57. | Code USA: <1 W Code ECE: >20 kW | Wiring. Wiring. |
1) ECE = European version.
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
10.0 | Left front window circuit (S21/1) Function: Opening | N57 10 24 (A.10) (E.3) | Ignition: ON S21/1: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V
<1 V | Wiring, 10.1, CF control module (N57). Wiring, 10.1. Wiring, 10.1. |
10.1 | S21/1 |
N57 10 24 (A.10) (E.3) | Ignition: OFF Disconnect connector E from (N57). S21/1: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW <2 W <2 W |
Wiring, S21/1. Wiring, S21/1. Wiring, S21/1. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
11.0
| Left front window circuit (S21/1) Function: Closing | N57 10 26 (A.10) (E.5) | Ignition: ON S21/1: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
9 - 14 V <1 V <1 V | Wiring, 11.1, CF control module (N57). Wiring, 11.1. Wiring, 11.1. |
11.1 | S21/1 | N57 10 26 (A.10) (E.5) | Ignition: OFF Disconnect connector E from N57. S21/1: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW <2 W <2 W |
Wiring, S21/1. Wiring, S21/1. Wiring, S21/1. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
12.0
| Left front window circuit (S21/1) Function: One-touch operation | N57 10 27 (A.10) (E.6) | Ignition: ON S21/1: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V 9 - 14 V <1 V | Wiring, 12.1, CF control module (N57). Wiring, 12.1. Wiring, 12.1. |
12.1 | S21/1 | N57 10 27 (A.10) (E.6) | Ignition: OFF Disconnect connector E from N57. S21/1: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW >20 kW <2 W |
Wiring, S21/1. Wiring, S21/1. Wiring, S21/1. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
13.0 | Left front window circuit (S21/1) Function: One-touch operation | N57 10 27 (A.10) (E.6) | Ignition: ON S21/1: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
9 - 14 V 9 - 14 V <1 V | Wiring, 13.1, CF control module (N57). Wiring, 13.1, N57. Wiring, 13.1. |
13.1 | S21/1 |
N57 10 27 (A.10) (E.6) | Ignition: OFF Disconnect connector E from N57. S21/1: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW >20 kW <2 W |
Wiring, S21/1. Wiring, S21/1. Wiring, S21/1. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
14.0 | Right front window circuit (S21/2) Function: Opening | N57 10 38 (A.10) (F.3) | Ignition: ON S21/2: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V <1 V <1 V | Wiring, 14.1, CF control module (N57). Wiring, 14.1. Wiring, 14.1. |
14.1 | S21/2 |
N57 10 38 (A.10) (F.3) | Ignition: OFF Disconnect connector F from N57. S21/2: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW <2 W <2 W |
Wiring, S21/2. Wiring, S21/2. Wiring, S21/2. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
15.0
| Right front window circuit (S21/2) Function: Closing | N57 10 36 (A.10) (F.1) |
Ignition: ON S21/2: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
9 - 14 V <1 V <1 V | Wiring, 15.1, CF control module (N57). Wiring, 15.1. Wiring, 15.1. |
15.1 | S21/2 |
N57 10 36 (A.10) (F.1) | Ignition: OFF Disconnect connector F from N57. S21/2: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW <2 W <2 W |
Wiring, S21/2. Wiring, S21/2. Wiring, S21/2. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
16.0 | Right front window circuit (S21/2) Function: One-touch operation | N57 10 37 (A.10) (F.2) | Ignition: ON S21/2: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V 9 - 14 V <1 V | Wiring, 16.1, CF control module (N57). Wiring, 16.1, N57. Wiring, 16.1. |
16.1 | S21/2 | N57 10 37 (A.10) (F.2) | Ignition: OFF Disconnect connector F from N57. S21/2: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW >20 kW <2 W |
Wiring, S21/2. Wiring, S21/2. Wiring, S21/2. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
17.0
| Right front window circuit (S21/2) Function: One-touch operation | N57 10 37 (A.10) (F.2) | Ignition: ON S21/2: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
9 - 14 V 9 - 14 V <1 V | Wiring, 17.1, CF control module (N57). Wiring, 17.1, N57. Wiring, 17.1. |
17.1 | S21/2 | N57 10 37 (A.10) (F.2) | Ignition: OFF Disconnect connector F from N57. S21/2: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW >20 kW <2 W |
Wiring, S21/2. Wiring, S21/2. Wiring, S21/2. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
18.0
| Left rear window switch (S21/3) and front console switch (S21/5) circuit Function: Opening S21/3 | N57 10 39 (A.10) (F.4) | Ignition: ON Rear power window safety switch (S21/7): OFF S21/3 and S21/5: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V <1 V <1 V | Wiring, 18.1, 18.2, CF control module (N57). Wiring, 18.1, 30.0. Wiring, 18.1. |
S21/5 | Press and hold to open (position 1). Press and hold to open (position 2). | <1 V <1V | Wiring, 18.2. Wiring, 18.2. | ||
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
18.1 | S21/3 | N57 10 39 (A.10) (F.4) | Ignition: OFF Disconnect connector F from N57. S21/3 and S21/5: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW
|
Wiring, S21/3, S21/5. Wiring, S21/3. Wiring, S21/3. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
18.2 | S21/5, (center console) | N57 10 39 (A.10) (F.4) | Ignition: OFF Disconnect connector F from N57. Disconnect left rear door plug connection (X35/3) (Figure 6). S21/5: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW
|
Wiring, S21/5. Wiring, S21/5. Wiring, S21/5. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
19.0
| Left rear window switch (S21/3) and front console switch (S21/5) circuit Function: Closing S21/3 | N57 10 41 (A.10) (F.6) | Ignition: ON Rear power window safety switch (S21/7): OFF S21/5 and S21/3: Rest position. Press and hold to close (position 1). Press and hold to open (position 2). |
9 - 14 V <1 V <1 V |
Wiring, 19.1, 19.2. Wiring, 19.1, 26.0. Wiring, 19.1. |
S21/5 | Press and hold to close (position 1). Press and hold to close (position 2). | <1 V <1V | Wiring, 19.2. Wiring, 19.2. | ||
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
19.1 | S21/3 | N57 10 41 (A.10) (F.6) | Ignition: OFF Disconnect connector F from N57. S21/5 and S21/3: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW
|
Wiring, S21/3, S21/5. Wiring, S21/3. Wiring, S21/3. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
19.2 | S21/5, (center console) | N57 10 41 (A.10) (F.6) | Ignition: OFF Disconnect connector F from N57. Disconnect left rear door plug connection (X35/3) (Figure 6). S21/5: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW
|
Wiring, S21/5. Wiring, S21/3. Wiring, S21/5. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
20.0
| Left rear window switch (S21/3) and front console switch (S21/5) circuit Function: One-touch operation S21/3 | N57 10 40 (A.10) (F.5) | Ignition: ON Rear power window safety switch (S21/7): OFF S21/5 and S21/3: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V 9 - 14 V <1 V |
Wiring, 20.1, 20.2, CF control module (N57). Wiring, 20.1, N57. Wiring, 20.1, 26.0. |
S21/5 | Press and hold to open (position 1). Press and hold to open (position 2). | 9 - 14 V <1V | Wiring, 20.2, N57. Wiring, 20.2. | ||
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
20.1 | S21/3 | N57 10 40 (A.10) (F.5) | Ignition: OFF Disconnect connector F from N57. S21/5 and S21/3: Rest position Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW
|
Wiring, S21/3, S21/5. Wiring, S21/3. Wiring, S21/3. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
20.2 | S21/5, (center console) | N57 10 40 (A.10) (F.5) | Ignition: OFF Disconnect connector F from N57. Disconnect left rear door plug connection (X35/3) (Figure 6). S21/5: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW
|
Wiring, S21/5. Wiring, S21/5. Wiring, S21/5. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
21.0 | Left rear window switch (S21/3) and front console switch (S21/5) circuit Function: One-touch operation S21/3 | N57 10 40 (A.10) (F.5) | Ignition: ON Rear power window safety switch (S21/7): OFF S21/5 and S21/3: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
9 - 14 V 9 - 14 V <1 V |
Wiring, 21.1, 21.2, CF control module (N57). Wiring, 21.1, N57. Wiring, 21.1. |
S21/5 | Press and hold to close (position 1). Press and hold to close (position 2). | 9 - 14 V <1 V | Wiring, 21.2, N57. Wiring, 21.2. | ||
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
21.1 | S21/3 | N57 10 40 (A.10) (F.5) | Ignition: OFF Disconnect connector F from N57. S21/5 and S21/3: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW
|
Wiring, S21/3, S21/5. Wiring, S21/3. Wiring, S21/3. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
21.2 | S21/5, (center console) | N57 10 40 (A.10) (F.5) | Ignition: OFF Disconnect connector F from N57. Disconnect left rear door plug connection (X35/3) (Figure 6). S21/5: Rest position. Press and hold to close (position 1). Press and hold to close (position 2). |
>20 kW
|
Wiring, S21/5. Wiring, S21/5. Wiring, S21/5. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
22.0
| Right rear window circuit (S21/4, S21/6) Function: Opening S21/4 | N57 10 23 (A.10) (E.2) | Ignition: ON Rear power window safety switch (S21/7): OFF S21/4 and S21/6: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
9 - 14 V <1 V <1 V |
Wiring, 22.1, 22.2, CF control module (N57). Wiring, 22.1, 26.0. Wiring, 22.1. |
S21/6 | Press and hold to open (position 1). Press and hold to open (position 2). | <1V <1V | Wiring, 22.2. Wiring, 22.2. | ||
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
22.1 | S21/4 | N57 10 23 (A.10) (E.2) | Ignition: OFF Disconnect connector E from N57. S21/4 and S21/6: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW
|
Wiring, S21/4, S21/6. Wiring, S21/4. Wiring, S21/4. |
Electrical Test Program - Test
Test step DTC | Test scope | Test connection | Test condition | Nominal value | Possible cause/Remedy |
22.2 | S21/6, (center console) | N57 10 23 (A.10) (E.2) | Ignition: OFF Disconnect connector E from N57. Disconnect right rear door plug connection (X35/4) (Figure 6). S21/6: Rest position. Press and hold to open (position 1). Press and hold to open (position 2). |
>20 kW
|
Wiring, S21/6. Wiring, S21/6. Wiring, S21/6. |
Referenced documents
- dh0000p0a001ux 00 - Connection and Use of Test Equipment 1 - Explanation of Symbols Used for Test Equipment and Components Passenger cars
- dh0000p0a002ux 00 - Connection and Use of Test Equipment 2 - Connector Layout of Data Link Connector Passenger cars
- dh0000p0a003ux 00 - Connection and Use of Test Equipment 3 - Connecting HHT or Impulse Counter Scan Tool, Reading and Erasing Diagnostic Trouble Code Memory - Passenger cars
- dh0000p0avt0ux 00 - Preface - Diagnostic Manual Passenger cars
- dh0000pa0up0ux 00 - Survey of Tests Diagnostic Manuals Body and Accessories Passenger Cars
- dh0501a00022ux 5.1 - Convenience Feature (CF) 22 - Electrical Test Program, Preparation for Test Model 140