Repair materials |
Number | Designation | Order number |
BR00.45-Z-1008-07A | Soft-tape 13 mm x 50 m, 1 box containing 10 rolls (3M dealer) | 3M Deutschland GmbH |
BR00.45-Z-1009-07A | Soft-tape 19 mm x 35 m, 1 box containing 7 rolls (3M dealers) | 3M Deutschland GmbH |
1 | Beadings and stepped edges which are not fitted with trim strips must be masked off so as to obtain a smooth transition to the existing paintwork. |
The painted exterior surface of the body is divided by strips, covers and joints in sectional paintwork. This results in a minimum of paintwork. |
2 | Mask off the existing paintwork approx. 5 mm away from stepped edge and bond the tape (1) over it, fold the tape over and secure with adhesive strips (2). |
P98.00-0206-01
3 | After completing the paintwork (before drying), remove the masking tape (1) so that the wet paint can blend at the transition without forming an edge. |
P98.00-0207-01
4 | Mask off the fold approx. 5 mm away from the area to be painted using masking paper (6). |
5 | Overlap this with masking tape (3), fold it over and secure with adhesive strips (4) so that it abuts the area to be painted. |
Close door after masking off. |
P98.00-2090-01
6 | Mask off the fold approx. 5 mm away from the area to be painted using masking paper (6). |
7 | Fold one edge of the adhesive tape (5) by approx. 25 % of the width and stick together. |
8 | Secure the prepared masking tape (5) in the area of the fold so that the stuck-together side abuts the area to be painted. |
Close door after masking off. |
P98.00-2091-01
9 | Stick "soft tape" (7) into fold without using masking paper so that it abuts the surface to be painted. |
Close door after masking off. |
P98.00-2092-01