S88.60-4510-09
1 | Connection | 6 | Cover | |
2 | Fresh water hose | 7 | Seal | |
3 | Bolts | Bolts | ||
4 | Vent hose | X58/23 | 230 V feed socket | |
5 | Electrical wiring harness |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
| Remove/install | ||
1 | Switch off ignition and remove transmitter key | ||
2 | Open cover on connection (1) | ||
3 | Remove charger plug from 230 V socket (X58/23) | If connected. | |
4 | Unscrew bolts (3, 8) | ||
5 | Pull 230 V feed socket (X58/23) out of connection (1) until cover (6) can be removed | Installation: Ensure that seal (7) is seated correctly on connection (1). | |
6 | Remove cover (6) from 230 V feed socket (X58/23) | ||
7 | Remove electrical wiring harness (5) from 230 V feed socket (X58/23) and remove 230 V feed socket (X58/23) | Observe connection schematic for electrical wiring harness (5). | |
8 | Remove fresh-water hose (2) from connection (1) | Installation: Check hose clamp. | |
If damage is present: | |||
| |||
Replace hose clamp. | |||
9 | Pull out connection (1) until vent hose (4) is accessible | ||
10 | Remove vent hose (4) from connection (1) | Installation: Check hose clamp. | |
If damage is present: | |||
| |||
Replace hose clamp. | |||
11 | Install in the reverse order | ||
| Check | ||
12 | Connect charger plug to 230 V socket (X58/23) and check 230 V socket (X58/23) for proper function | Read off charging voltage from central electronics display unit in cockpit. | |
| Remove | ||
13 | Remove trim from kitchenette below cover of refrigerator box | ||
For leak check. | |||
| Check | ||
14 | Check connection fitting on fresh water hose (2) and seal (7) between connection (1) and body for leakage in vehicle interior | ||
| Install | ||
15 | Install trim of kitchenette below cover of refrigerator box |
Έγγραφα που αναφέρονται
- ar8661s2283e
- as0000z003501a Κίνδυνος θανάτου κατά την εργασία σε εξαρτήματα και συστήματα με U >= 30 V εναλλασσόμενη τάση (AC) ή U >= 60 V συνεχή τάση (DC)