Remove/install front bumper · ar8820p2000pc · Mercedes-Benz WIS

AR88.20-P-2000PC

Remove/install front bumper

11.3.08

MODEL 203.7## #E with CODE (809) Model year 2009

P88.20-3182-09

Shown with code (220) Parktronic system (PTS)

1 Bumper paneling

2 Screw

3 Strut

4 Radiator grille

5 Bolts

E5/2 Right fog lamp

X26/27 PTS, front bumper connector (with code (220) Parktronic system (PTS))

6 Screw

B14 Outside temperature display temperature sensor

E5/1 Left front fog lamp

 	Remove/install
1	Open engine hood
2	Remove bolts (2)
3	Unclip strut (3) from radiator grille (4) (arrows)
4	Loosen front fender liner in left and right front fender until bolts (5) are accessible
5	Unscrew bolts (5) from left and right front fender
6	Remove bolts (6)
7	Remove bumper paneling (1) with aid of helper until outside temperature indicator temperature sensor (B14) and electrical connectors on left front fog lamp (E5/1) and right front fog lamp (E5/2) are accessible.
8	Unclip outside temperature indicator temperature sensor (B14) from bumper paneling (1).	 Do not disconnect electrical connector from outside temperature indicator temperature sensor (B14).
9	Disconnect electrical connector from left front fog lamp (E5/1) and right front fog lamp (E5/2)
10	Disconnect PTS, front bumper connector (X26/27)	On vehicles with code (220) Parktronic system (PTS)
11	Remove bumper paneling (1) with aid of helper
12	Install in the reverse order
13	Check adjustment for left fog lamp (E5/1) and right fog lamp (E5/2), correct if necessary
	Check and correct the adjustment of the headlamps		AP82.10-P-8260P