Remove/install handle on roof

AR68.30-S-4330E

Remove/install handle on roof

14.12.2015

Model

447, 448

Shown on model 447.8 with code LC6 (Illumination in rear grab handle with reading spotlight)

1

Grab handle

3

Mounting clamp

2

Blind

4

Electrical connector



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Fold down grab handle (1) and hold

2

Unclip covers (2) using a suitable screwdriver, and remove

3

Unclip mounting clips (3)

 Installation: Check mounting clips (3).

If mounting clips (3) are damaged



Replace mounting clips (3)

4.1

Remove grab handle (1) from headliner

Model 447
except code LC3 (Illumination in rear grab handle)
except code LC6 (Illum. in rear grab handle with reading spotlight)
Model 448
except code LC6 (Illum. in rear grab handle with reading spotlight)

4.2

Pull grab handle (1) out of headliner until electrical connector (4) is accessible

Model 447.7/8, 448
with code LC6 (Illum. in rear grab handle with reading spotlight)
Model 447.7/8
with code LC3 (Illumination in rear grab handle)

5

Disconnect electrical connector (4) and remove grab handle (1)

Model 447.7/8, 448
with code LC6 (Illum. in rear grab handle with reading spotlight)
Model 447.7/8
with code LC3 (Illumination in rear grab handle)

6

Remove lamp in grab handle (1)

Model 447.7/8, 448
with code LC6 (Illum. in rear grab handle with reading spotlight)
Model 447.7/8
with code LC3 (Illumination in rear grab handle)
When replacing grab handle (1).

AR82.20-S-1222E

7

Install in the reverse order



Check

8

Check illumination in grab handle (1) for proper function

Model 447.7/8, 448
with code LC6 (Illum. in rear grab handle with reading spotlight)
Model 447.7/8
with code LC3 (Illumination in rear grab handle)