Remove/install cover on instrument cluster

Τύπος ar · θέμα 68.10 · έκδοση 0206 · 2003-09-15

Ισχύει για: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Δεν είναι διαθέσιμο στα «el»· εμφανίζεται στα Αγγλικα.

AR68.10-D-1550A

5.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Remove/install cover on instrument cluster

D68.20-1101-11

1 Cover

2 Bolt

3 Connector

 	Remove/Install
1	Unscrew screws (2)
2	Pull out cover (1)		*140589023300
		 To avoid damage to the cover when removing move removal hook (01) through second louver from bottom and position on reinforcement (magnified section).
		 Installation: Press in cover uniformly.
3	Disconnect plug (3)	 A different number of switches may be fitted depending on vehicle equipment.
4	Install in the reverse order

Pulling hooks

140 589 02 33 00