Weld in inner section of end crossmember

Τύπος ar · θέμα 64.20 · έκδοση 0102 · 2016-05-25

Ισχύει για: Model 447.6 Model 447.7 except code UR1 (Seat rail system with quick-release attachment system) except code UR3 (Seat mount with quick fastener (2 passenger seat rows)) except code UR6 (Rear seats with quick-release locks (1st row)) except code ZU4 (Production Argentina) Model 448.7 except code UR1 (Seat rail system with quick-release attachment system) except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Δεν είναι διαθέσιμο στα «el»· εμφανίζεται στα Αγγλικα.

Θέση

Λειτουργική ομάδα 3 Αμαξωμα › 64 Πισω τοιχωμα και πισω τμημα › 64.20 Πισω τμημα — Σειρά 447 (μοντέλα 6**, 7**) · Σειρά 448 (μοντέλα 7**)

EinPAS 35 Αμάξωμα/Πλαίσιο/Εξαρτήματα προσαρμογής › 35.31 Πίσω τοίχωμα/Πίσω μέρος › 35.31.30 Πίσω τοίχωμα/πίσω μέρος — Σειρά 447 (μοντέλα 6**, 7**) · Σειρά 448 (μοντέλα 7**)

AR64.20-S-1120-03EA

Weld in inner section of end crossmember

Model	447.6
Model	447.7
	except code UR1 (Seat rail system with quick-release attachment system)
	except code UR3 (Seat mount with quick fastener (2 passenger seat rows))
	except code UR6 (Rear seats with quick-release locks (1st row))
	except code ZU4 (Production Argentina)
Model	448.7
	except code UR1 (Seat rail system with quick-release attachment system)
	except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

447 589 01 23 00

Locating tool

1	Install crossmember inner section (1) and lower corner pillar reinforcement with  locating tool, fit and fix in place.

2	Crossmember inner section (1)   (areas A to C).

 Spot weld area A only in accessible area.

3	Remove lower corner pillar reinforcement and  locating tool.

S64.20-4696-06

4	Complete crossmember inner section (1)   (area A).

5	Crossmember inner section (1)   (areas D to G).

6	Crossmember inner section (1)   (areas H and I).

 Inert gas weld in intervals and allow to cool down in between. Reduces heat distortion.

7	Clean weld joints.

8	Remove shavings.

S64.20-4697-06

9	Coat welding areas no longer accessible after installing bottom corner pillar reinforcement and crossmember outer section, clean and coat with zinc dust paint.