S61.10-4822-09
1 | Drill holes for MAG welding on inner rear longitudinal member (1) (areas A and B). |
2 | Grind mating surfaces on inner rear longitudinal member (1) down to bare metal in crosshatched areas and around holes (areas A and B). |
Sand down spot weld flanges to bare metal on both sides. |
3 | Grind mating surfaces on inner rear longitudinal member (1) down to bare metal in crosshatched areas. |
4 | Remove shavings and drill chips. |
5 | Coat insides of spot weld flanges with zinc dust paint. |
S61.10-4823-06