ar4230s0712e

Remove/install left front or right rpm sensor

Τύπος ar · θέμα 42.30 · έκδοση 0101 · 2016-01-21

Ισχύει για: Model 447, 448

Δεν είναι διαθέσιμο στα «el»· εμφανίζεται στα Αγγλικα.

Θέση

Λειτουργική ομάδα 2 Αμαξωμα › 42 Φρενα - υδραυλικα και μηχανικα › 42.30 Συστημα αντιμπλοκαρισματος τροχων (ABS) — Σειρά 447 · Σειρά 448

EinPAS 26 Ενεργά συστήματα ασφάλειας › 26.20 Σύστημα ελέγχου φρένων/πρόσφυσης › 26.20.12 Αισθητήρας/Διακόπτης/Σετ καλωδίων — Σειρά 447 · Σειρά 448

AR42.30-S-0712E

Remove/install left front or right rpm sensor

15.1.16

Model

447, 448

Remove/install left front or right rpm sensor

S42.30-4508-09

1

Bolt

L6/1

Left front rpm sensor

X62/27

Right front rpm sensor electrical connector

2

Bracket

L6/2

Right front rpm sensor

3

Bracket

X62/26

Left front rpm sensor electrical connector

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

General information on malfunctions in the brake system

AH42.30-N-2007-01A

Remove/install

1

Remove each fender liner from fender

AR88.10-S-1300E

The left front rpm sensor electrical connection (X62/26) or right front rpm sensor electrical connection (X62/27) must be accessible.

2

Detach left front rpm sensor electrical connection (X62/26) or right front rpm sensor electrical connection (X62/27)

To do so, unclip left front rpm sensor electrical connection (X62/26) or right front rpm sensor electrical connection (X62/27).

Installation: Check retaining clip, inspect and, if necessary, replace.

3

Remove each bolt (1)

Bolt, rpm sensor to steering knuckle

*BA42.30-N-1001-01A

4

Remove left front rpm sensor (L6/1) or right front rpm sensor (L6/2) from steering knuckle

Installation: Apply light coating of grease to left front rpm sensor (L6/1) or right front rpm sensor (L6/2).

Long-life grease

*BR00.45-Z-1001-06A

5

Remove left front rpm sensor (L6/1) or right front rpm sensor (L6/2).

To do so, unclip electrical line from left front rpm sensor (L6/1) or right front rpm sensor (L6/2) from brackets (2, 3).

Installation: Ensure bulb is correctly installed.

Check

6

Check electrical line for breakage or chafe marks

Depending on findings

Replace left front rpm sensor (L6/1) or right front rpm sensor (L6/2).

7

Install in the reverse order

Front axle rpm sensor

Number

Designation

Model 447, 448

BA42.30-N-1001-01A

Bolt, rpm sensor to steering knuckle

Nm

8

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-06A

Long-life grease

A 000 989 63 51 11

Έγγραφα που αναφέρονται