Remove/install microswitch of emergency clutch pedal

Τύπος ar · θέμα 29.10 · έκδοση 0201 · 2006-10-31

Ισχύει για: MODEL 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 with TRANSMISSION 715.5 with CODE (GE1) Electronic drive control

Δεν είναι διαθέσιμο στα «el»· εμφανίζεται στα Αγγλικα.

AR29.10-W-0380A

8.3.96

MODEL 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 with TRANSMISSION 715.5 with CODE (GE1) Electronic drive control

Modification notes

20.12.01

Steps 3 to 6 revised

W29.10-0004-12

S 55 Microswitch

S 55.1 Microswitch connector

 	Remove/Install
1	Remove footwell cover on driver side		AR68.30-W-1310A
2	Unplug connector (S 55.1)
3	Detach retracting spring at emergency clutch pedal and remove
4	Unscrew nut M8 at emergency clutch pedal and remove emergency clutch pedal	 Pay attention to shim.
5	Drive microswitch (S 55) out of emergency clutch pedal using a suitable drift	 The microswitch (S 55) is affixed to the emergency clutch pedal.
		 Installation: Clean mounting hole of microswitch (S 55) at emergency clutch pedal.
		Following installation in the emergency clutch pedal, affix both catches of new microswitch (S 55) (1 drop per catch).	*BR00.45-Z-1065-02A
6	Install in the reverse order

Repair materials

Number	Designation	Order number
BR00.45-Z-1065-02A	Loctite 401	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de