AR28.10-P-0300A | Removing, installing transfer case rubber mounts | 1.9.98 |
MODEL 460, 461 with TRANSFER CASE 750.60
P28.10-2112-01
To remove the rubber mount the special tool consists of the following parts:
1 Threaded shaft with nut
2 Pulling sleeve
3 Disc
4 Nut
To remove the rubber mount the special tool consists of the following parts:
1 Threaded shaft with nut
5 Pressure sleeve
6 Guide sleeve
7 Counter socket
P28.50-2113-01
| Removing | ||
| The work sequence is the same on all four rubber mounts | ||
1 | Remove transfer case | ||
2 | Attach removal tool to rubber mount and screw in nut (4) with disc (3) | ||
| |||
3 | Pull off rubber mount | ||
| Installing | ||
4 | Smear rubber mount with lubricating agent, push in guide sleeve and attach pressing-in tool | ||
| |||
5 | Press rubber mount into console | ||
| |||
6 | Detach pressing-in tool and check seat of rubber mount | ||
7 | Install transfer case |
Pressing-out and pressing-in tool
460 589 00 43 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1030-06A | ATE brake cylinder paste (blue) | ITT Automotive Europe GmbH |