ar2719d4980a

Remove/install pilot bushing of electrohydraulic controller unit

Τύπος ar · θέμα 27.19 · έκδοση 0101 · 2012-02-21

Ισχύει για: TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 TRANSMISSION 722.681 in MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Δεν είναι διαθέσιμο στα «el»· εμφανίζεται στα Αγγλικα.

Θέση

Λειτουργική ομάδα 2 Αμαξωμα › 27 ΑΚΤ › 27.19 Κιβ. ταχ. ηλεκτρικο — Σειρά 902 (μοντέλα 6**) · Σειρά 903 (μοντέλα 6**) · Σειρά 904 (μοντέλα 6**) · Σειρά 905 (μοντέλα 6**)

EinPAS 17 Σύστημα μετάδοσης κίνησης/Άξονας › 17.20 Κιβώτιο ταχυτήτων › 17.20.11 Εγκέφαλος/Ρελέ — Σειρά 902 (μοντέλα 6**) · Σειρά 903 (μοντέλα 6**) · Σειρά 904 (μοντέλα 6**) · Σειρά 905 (μοντέλα 6**)

EinPAS 17 Σύστημα μετάδοσης κίνησης/Άξονας › 17.20 Κιβώτιο ταχυτήτων › 17.20.35 Μονάδα ελέγχου/Περίβλημα χρονισμού/Πλάκα διανομέα λαδιού — Σειρά 902 (μοντέλα 6**) · Σειρά 903 (μοντέλα 6**) · Σειρά 904 (μοντέλα 6**) · Σειρά 905 (μοντέλα 6**)

Ισχύει επίσης για κινητήρες/κιβώτια ταχυτήτων: 722 681

AR27.19-D-4980A

Remove/install pilot bushing of electrohydraulic controller unit

15.2.12

TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6

TRANSMISSION 722.681 in MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Remove/install pilot bushing of electrohydraulic controller unit

D27.19-1124-04

1 O-rings

2 Pilot bushing

3 Screw

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

Isolate ground lead to prevent accidental contact.

Notes on battery

AH54.10-P-0001-01A

2

Detach electrical connector.

AR27.19-D-0750-01B

3

Unscrew bolt (3) and remove pilot bushing (2)

Catch oil running out.
Replace O-rings (1).

4

Install in the reverse order

Έγγραφα που αναφέρονται