Remove/install wiring harness in torque converter clutch

AR25.40-W-0170A

9.3.10

MODEL 950, 952, 953, 954 with ENGINE 541.9 with CODE (G02) Torque converter clutch

MODEL 950, 952, 954 with ENGINE 542.9 with CODE (G02) Torque converter clutch

W25.40-1088-06

5 Wiring harness

5.1 Plug housing

6 Gasket

7 Screw

Y58 WÜK pilot control valve

 	Remove/Install
1	Remove torque converter clutch		AR25.40-W-0100A
2	Detach retarder of torque converter clutch		AR25.40-W-0520A
3	Remove master control unit at torque converter clutch		AR25.40-W-0550A
4	Separate wiring harness (5) at torque converter lockup clutch pilot control valve (Y58)
5	Remove clamps of wiring harness (5) at torque converter housing and oil pump		*BA25.40-N-1003-01C
			*BA25.40-N-1013-01C
6	Remove plug housing (5.1) of wiring harness (5) at torque converter housing	 Installation: Install new gasket (6) at plug housing, secure bolts (7) for plug housing to torque converter housing using adhesive.	*BR00.45-Z-1001-02A
7	Install in the reverse order

 Torque converter clutch (TCC)

Number	Designation		Engines 541.9, 542.9 with code G02


BA25.40-N-1003-01C	Bolt, cable harness clamp to torque converter clutch housing and oil pump	Nm	45
BA25.40-N-1013-01C	Bolt, oil pump to torque converter clutch housing	Nm	45

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-02A	Thread locking adhesive, Loctite 241	A 002 989 94 71