AP83.00-S-8381A | Replace dust filter for heating/ventilation | 1.12.99 |
MODEL 638.### 2#
Right-hand steering only
S83.00-4001-06
1 Cover
2 Dust filter
3 Bolt
4 Spacing tube
| Removing, installing | ||
1 | Remove left and right footwell trim | ||
2.1 | Remove center console | With code FF6 (center console) | |
2.2 | Remove covering | Without code FF6 (center console) | |
3 | Undo bolts (3) at spacing tube (4) and exit spacing tube (4) towards the top | Note installation position | |
4 | Cut off cable tie at electrical wiring harness | Installation: Replace cable tie | |
5 | Pull off condensation-water drain of heater/ventilation housing | ||
6 | Push cover (1) at heater/ventilation housing to the left and take it off | ||
7 | Remove dust filter (2) | Pull dust filter (2) half way out, bend to the rear and remove. | |
8 | Install in the reverse order | Take care not to damage the felt sealing at the dust filter frame. |
Pedal, bearing block