1 | Check the steering column sensor | ||
The sensor assembly of steering angle must be checked before starting the parameterization procedure of the ESP unit. | |||
2 | Request the file of ESP unit parameterization | Preparation: request the file of ESP unit parameterization, which is generated individually on the basis of the effective values of wheelbase of each vehicle. | |
3 | Install the diagnose equipment and carry out a "quick test" | After the individual parameterization file of the vehicle has already been inserted in the diagnose equipment. Then, follow the remaining steps. | |
4 | Select “BS unit - Management of Brakes” | ||
5 | Select "Adaptation of the control unit" | ||
6 | Select "Parameterization" | ||
7 | Select "Automatic Parameterization" | Follow the remaining steps requested by the diagnose equipment. | |
8 | Finish the process of activation of the system | ||
9 | Remove the diagnostic equipment | Request to the body manufacturer one authorized person to perform the route. It is necessary to drive the vehicle at least along 500 m at a minimal speed of 20 Km/h. |