Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

AD07.61-P-2000F

Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

25.11.2019

Engine

120

-

 Danger

Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.

Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage to ignition system

Engine 120mit Benzin-Einspritz- und Zündsystem ME

AH15.10-P-0002-01D

Wiring diagrams models 129, 140 groups 07 and 00

Connecting and using test equipment

AD00.00-P-1000AZ

Connecting hand-held tester (HHT), reading fault memory

AD00.00-P-2000-03A

Socket box connection diagram - ME-SFI - testing of electrical system

AD07.61-P-2000-01B

Connector assignment for ME-SFI gasoline injection and ignition system

AD07.61-P-2000-02E

Signal images - ME-SFI - gasoline injection system

AD07.61-P-2000-03B

Notes on HHT for ME-SFI gasoline injection and ignition system

AD07.61-P-2000-04A

Notes on testing CAN module for ME-SFI fuel injection system

AD07.61-P-2000-05A

Tools for testing electrical system of ME-SFI fuel injection and ignition system

AD07.61-P-2000-06C

ME-SFI ignition system signal images

AD07.61-P-2000-07F

Notes on ME-SFI diagnostic trouble code memory

AD07.61-P-2000-10F

Tooling for fuel pressures - ME-SFI - testing of hydraulic system

AD07.61-P-2100-01A

ME-SFI fuel pressures test connection

AD07.61-P-2100-02E

Tools, fuel pump - ME-SFI hydraulic system testing

AD07.61-P-2200-01C

Connect socket box - ME-SFI - testing of fuel pump

AD07.61-P-2200-02E

Multimeter connection schematic for testing ME-SFI hydraulics, fuel pump

AD07.61-P-2200-03A

Tools fuel injectors - Testing ME-SFI hydraulic system

AD07.61-P-2300-01C

Connect socket box - ME-SFI - testing of fuel injectors

AD07.61-P-2300-02E

Spray pattern - ME-SFI - testing of fuel injectors

AD07.61-P-2300-03B

Motor electronics (ME-SFI) fuel injection and ignition system arrangement of components

Model 129

GF07.61-P-0001-01T

Model 140

GF07.61-P-0001-01U

Test wiring harness for testing fuel injection valves

WF58.50-P-0761-01A