Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

AD07.61-P-2000C

Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

25.11.2019

Engine

104.941/943/944/991/994 as of 8/1/96

-

Engine

104.995

as of model year 1997

with code 494 (US version)

with code 498 (Japanese version)

with code 807 (Model year 1997)

with code 808 (Model year 1998)

-

 Danger

Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.

Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage to ignition system

AH15.10-P-0002-01D

When removing the couplings at the ME-SFI [ME] control unit, first remove the center coupling; during attachment, the center coupling D is the last to be attached.

Connecting and using test equipment

AD00.00-P-1000AZ

Connecting hand-held tester (HHT), reading fault memory

AD00.00-P-2000-03A

Socket box connection diagram - ME-SFI - testing of electrical system

AD07.61-P-2000-01A

Connector assignment for ME-SFI gasoline injection and ignition system

AD07.61-P-2000-02C

Signal images - ME-SFI - gasoline injection system

AD07.61-P-2000-03B

Notes on HHT for ME-SFI gasoline injection and ignition system

AD07.61-P-2000-04A

Notes on testing CAN module for ME-SFI fuel injection system

AD07.61-P-2000-05A

Tools for testing electrical system of ME-SFI fuel injection and ignition system

AD07.61-P-2000-06B

ME-SFI ignition system signal images

AD07.61-P-2000-07D

Notes on ME-SFI diagnostic trouble code memory

AD07.61-P-2000-10D

Tooling for fuel pressures - ME-SFI - testing of hydraulic system

AD07.61-P-2100-01A

ME-SFI fuel pressures test connection

AD07.61-P-2100-02C

Tools, fuel pump - ME-SFI hydraulic system testing

AD07.61-P-2200-01B

Connect socket box - ME-SFI - testing of fuel pump

AD07.61-P-2200-02C

Multimeter connection schematic for testing ME-SFI hydraulics, fuel pump

AD07.61-P-2200-03A

Tools fuel injectors - Testing ME-SFI hydraulic system

AD07.61-P-2300-01B

Connect socket box - ME-SFI - testing of fuel injectors

AD07.61-P-2300-02C

Spray pattern - ME-SFI - testing of fuel injectors

AD07.61-P-2300-03B

Motor electronics (ME-SFI) fuel injection and ignition system arrangement of components

104.943/991 as of 1.8.96

GF07.61-P-0001-01C

Model 140 with engine 104

GF07.61-P-0001-01D

Model 202 with engine 104

GF07.61-P-0001-01E

Model 210 with engine 104 with code 494 (USA version) with code 498 (Japan version)

GF07.61-P-0001-01F

Overview of wiring diagrams for mixture formation

Model 129, 140, 202, 210 group 07 and 00

PE07.00-P-1100A

Test wiring harness for testing fuel injection valves

WF58.50-P-0761-01A