B82.85-0009-11
Remove the FleetBoard computer
1 Switch-off the vehicle ignition.
2 Install the tools in the lateral holes on the FleetBoard computer (2) to unlatch it from the console (3).
3 Remove the FleetBoard computer (2) from the console (3).
B82.85-0004-11
4 Remove the antenna cables GPS/GSM (5, 6 ) and the electric connector (P502) from the FleetBoard computer (2) .
B82.85-0008-11
Remove / Install the telephone card "SIM Card"
5 Displace the latch (1)and remove the telephone card (4) from the FleetBoard computer (2).
To remove the telephone card (4) push-it in the reverse direction of the arrow, the card will jump out.
6 Install the new telephone card and fasten it with the latch (1).
When inserting the telephone card observe the correct position (see figure).
Install the FleetBoard computer
7 Install the FleetBoard computer in reverse order
Configure the telephone card "SIM Card"
8 Switch-on the vehicle ignition to start the operationaltest.
During the operationaltest, the LED (green) located in the front part of the equipment will flash for up to 2minutes, after this period it will have to remain permanentlylit (green).
9 Check the operation.
The correct operation of the equipment is indicated throughthe LED (green) permanently lit. Operation successfully accomplished! In the case the LED remains lit in red color, dial 0800 9709090.