AR55.50-B-0300A | Removing and installing hydraulic cylinder | 12.02.16 |
Vehicle 382.154, 382.155, 382.157, 382.158
M55.50-0026-02
1 Safety bolt
2 Safety bolt
3 Bushing
4 Bushing
5 Pressure ring
6 Washers
| REMOVAL | ||
1 | Park the vehicle on a flat place | ||
2 | Remove the platform from the articulation | ||
3 | Disconnect the electric whip from the hydraulic cylinder | Pay attention to the color marks of the electric whip they make easier the assemblage. | |
4 | Remove the safety bolts (1) and (2) | ||
5 | Remove the bushings (3) and (4) | Utilize an appropriate puller | |
6 | Remove the hydraulic cylinder | Avoid dropping the hydraulic cylinder. | |
| Installing | ||
7 | Position the pressure ring (5) and the washer (6) precisely in the lower orifices of the shock absorber | ||
8 | Install the hydraulic cylinder | Position the hydraulic cylinder with the mark “TOP” face up as indicated by the arrow | |
9 | Install the bushings (3) and (4) | ||
10 | Install the bolts (1) and (2) | | |
11 | Connect the electric whip of the hydraulic cylinder | Pay attention to the color marks of the electric whip they make easier the assemblage. | |
12 | Install the articulation platform |
Steering system