B47.10-0021-11
Represented on vehicle 958.4
1 Threaded cap
2 Electric connector
3 Fuel piping (input)
4 Fuel tank
| Remove and install | ||
Danger! | Explosion hazard by ignition, risk of poisoning by inhaling and ingesting fuel, as well as risk of injuries by fuel contact with skin and eyes | It is prohibited fire, sparkles, open flame and smoking. Only store fuel in appropriate containers, properly identified. When handling fuels always use appropriate protective clothes and equipment | |
1 | Turn ignition OFF | ||
2 | Open fuel supply cover | ||
3 | Drain fuel from reservoir (4) until under the fuel (B22) level sensor level | Collect fuel into a clean and appropriate container. | |
4 | Remove fuel input (3) piping | Press to the side the fuel input (3) piping insert according to instructions. | |
5 | Separate electrical connector (2) in fuel supply level sensor | Press the electrical connector (2) insert according to instruction. | |
6 | Remove threaded cover (1) | ||
7 | Remove fuel level sensor (B22) | Carefully remove fuel level sensor upward. Take care not to damage the fuel control rod or inner wire harness. | |
| Fuel supply level sensor modified | ||
8 | Install in the reverse order |