W46.10-0003-06
1 Flywheel
2 Nut
3 Flywheel cover
| Remove and install | ||
1 | Remove the cover (3) from the center of the steering wheel, making pressure as a lever | ||
2 | Loosen hex nut (2) and remove the steering wheel (1) | Mark the steering wheel position related to the steering column to install it in the same position later on. | |
Install: Check that position marks in the steering wheel and in the steering column match, to ensure proper aligning of the steering wheel when the steering wheel is in a straight line. | |||
Tighten the hex nut (2) using the recommended torque. | |||
| |||
3 | Install in the reverse order |
Steering wheel, steering column tube, steering shaft