Interwheel differential lock
Número | Denominação | Rear axles 740.6, 740.800/804/835 | |||
BE35.40-B-1001-02A | Axial clearance of the crosswise blocking engagement bushing | mm | 0.5 | ||
W33.40-0005-01
Check
1 Install a bolt M18 x 1.5 (as indicated by the arrow) on the transversal lock actuator cylinder.
2 Fully actuate the sliding coupling sleeve (1) screwing in the bolt until the transversal lock engages.
3 Use a spacing template to measure the axial clearance between the base of the tooth of sliding coupling sleeve (1) and the top of the coupling tooth of fixed coupling sleeve (2).
W33.40-0006-01
Adjust
4 Should the axial clearance between the sliding coupling sleeve and the fixed sleeve not be correct, make the necessary adjustment by tightening or loosening adjustment screw (3) on the control shaft. After obtaining the specified clearance, lock the screw by tightening nut (4).