ar3530b047003c

Determine shim thickness on drive pinion

Typ ar · Thema 35.30 · Version 0100 · 2016-02-12

Gültig für:

Nicht verfügbar in „de“; angezeigt wird Englisch.

Einordnung

Funktionsgruppe 2 Fahrwerk › 35 Hinterachse › 35.30 Antrieb, Antriebswellen — Baureihe 386 (Baumuster 014) · Baureihe 693 (Baumuster 128, 144, 184, 191, 195) · Baureihe 695 (Baumuster 014, 043, 302) · Baureihe 958

EinPAS 17 Antriebsstrang/Achse › 17.51 Hinterachse › 17.51.65 Hinterachsgetriebe/Achsdurchtrieb — Baureihe 386 (Baumuster 014) · Baureihe 693 (Baumuster 128, 144, 184, 191, 195) · Baureihe 695 (Baumuster 014, 043, 302) · Baureihe 958

Gilt auch für Motoren/Getriebe: 746 ***, 746 960, 746 962, 746 964, 746 966, 772 ***, 772 112

AR35.30-B-0470-03C

Determine shim thickness on drive pinion

Rear axle drive

Número

Denominação

Rear axle 772.112

BE35.30-B-1004-01H

Thickness of compensating shims

Code Meritor 390 029

mm

0.05

Code Meritor 029 391

mm

0.12

Code Meritor 029 386

mm

0.20

Code Meritor 029 387

mm

0.50

Rear axle drive

Número

Denominação

Rear axle 772.110/115/117

BE35.30-B-1001-01B

Thickness of the compensation shims

code - Meritor 027 290-6

mm

-

code - Meritor 027 288-4

mm

-

code - Meritor 027 289-2

mm

-

code - Meritor 028 453-0

mm

0.08

code - Meritor 028 453-6

mm

0.13

code - Meritor 028 453-8

mm

0.25

code - Meritor 029 390

mm

-

code - Meritor 029 391

mm

-

code - Meritor 029 386

mm

-

code - Meritor 029 387

mm

-

Produtos para reparos

Número

Denominação

Número de pedido

BR00.45-B-1002-01A

Chemical gasket

FAG-3 (Loctite)

Determine shim thickness on drive pinion

B35.30-0033-01

Compensating washers thickness

Chemical joint application on the contact surfaces must only occur after contact mark adjustment of crown gear teeth with the pinion.

The thickness of the compensation washer pack will determine the ideal contact marks for the crown gear teeth.

If the same crown gear and pinion are to be installed, the same set of compensation washers previously installed is also to be used.

If different crown gear and pinion are to be installed, consider the values engraved on the new and the used pinion head; the difference between both must be added or subtracted from the thickness of the compensation washer pack that was originally installed.

Determine shim thickness on drive pinion

B35.30-0032-01

Values engraved on the pinion head are given in hundredth of 1 millimeter.

1 Measure and write down the thickness of the original compensation washer pack.

2 Note the number engraved on the original pinion head. If the number is positive (+), subtract this value from the thickness of the original washer pack. If negative (-), add the value.

3 Register the value obtained in item 2.

4 Note the measurement engraved on the new pinion. If the value is positive (+), add it to the result obtained in item 2; if negative (-), subtract the value.

5 The final result obtained determines the thickness of the new compensation washer pack.

Example:

Original pack = 0.90

Original pinion = + 0.05

Calculation: 0.90 - 0.05 = 0.85

New pinion = - 0.13

Calculation: 0.85 - 0.13 = 0.72 (thickness of new compensation washer pack)