ar3515b0100xa

Remove/install wishbone control arm

Typ ar · Thema 35.15 · Version 0100 · 2016-02-12

Gültig für: Rear axle 742.825, 746.888 with Vehicle 368Rear axle 746.984 with Vehicle 384.065

Nicht verfügbar in „de“; angezeigt wird Englisch.

Einordnung

Funktionsgruppe 2 Fahrwerk › 35 Hinterachse › 35.15 Achslenker — Baureihe 368 · Baureihe 384 (Baumuster 065)

EinPAS 17 Antriebsstrang/Achse › 17.51 Hinterachse › 17.51.40 Querlenker/Lenker/Stabilisator — Baureihe 368 · Baureihe 384 (Baumuster 065)

EinPAS 17 Antriebsstrang/Achse › 17.52 Zusatzachse › 17.52.40 Querlenker/Lenker/Stabilisator — Baureihe 368 · Baureihe 384 (Baumuster 065)

Gilt auch für Motoren/Getriebe: 742 825, 746 888, 746 984

AR35.15-B-0100XA

Remove/install wishbone control arm

12.02.16

Rear axle 742.825, 746.888 with Vehicle 368

Rear axle 746.984 with Vehicle 384.065

Remove/install wishbone control arm

B35.15-0001-06

Vehicles with HH 4 axle

1 Triangular arm

2 Arm easel

3 Support

Remove and install

Danger!

Risk of accidents due to vehicle unintentional move when the engine is started. Risk of injury by pinching and burn by contact during the starting procedure or with the engine running

Assure vehicle against unintentional move. Use tight fitting and closed work clothes. Do not touch heated or running parts.

AS00.00-B-0005-01A

1

Loosen the bolts fastening the triangular arm (1) of the arm easel (2).

*BA35.15-B-1001-03A

2

Loosen the bolts fastening the triangular arm of the support (3) and remove it.

Installing: If necessary, replace the arm's expansive bushing.

*BA35.15-B-1002-03A

3

Install in reverse order

Control arm

Número

Denominação

Chassis 368.1, 384.065

BA35.15-B-1001-03A

Solid state triangular stretching bar on the rack, over the rear axle

M18x1.5

Nm

350...390

M22x1,5

Nm

520...600

BA35.15-B-1002-03A

Solid triangular stretching bar on the chassis cross member bearing

M18x1.5

Nm

350...390

M22x1,5

Nm

520...600

Referenzierte Dokumente