AR33.20-B-0310E | Remove/install front wheel hub | 12.02.16 |
Front axle 739.3 with CODE BB6 (Drum brakes on front and rear axle)
B33.25-0029-11
1 Brake drum
2 Bolt
3 Hub's cap
4 Gasket
5 Nut snap bolt
6 Nut
7 Thrust washer
8 Outer bearing
9 Wheel hub
10 Bolt
11 Inner bearing
12 Radial seal
| Remove | ||
1 | Pull the brake drum (1) from the wheel hub (9) | Before removing the brake drum, mark the position on the hub and drum. | |
The bolts can be used for the removal of the brake drum. | |||
2 | Remove the bolts (2) and the hub cap (3) | ||
3 | Tighten the nut's lock bolt | ||
4 | Unfasten and remove the bearings fastening nut (6) | | |
5 | Remove the thrust washer (7) | ||
6 | Extract the wheel hub (9) | If the inner bearing (11) gets stuck in the axle's sleeve , it must be removed with the puller. | |
| |||
| |||
7 | Remove from the wheel hub (9) the radial seal (12) and the inner bearing (11) | ||
| Install | ||
8 | Install in the wheel hub (9) the inner bearing (11) and the radial seal (12) | Lubricate with grease the inner bearing and the radial seal | |
Use a new radial seal. | |||
9 | Install the wheel hub (9) in the axle's sleeve | Install it carefully in order not to damage the seal or the axle sleeve 's thread. | |
| |||
10 | Lubricate with grease and install the external bearing (8) | Supply the wheel hub with grease. | |
| |||
| |||
11 | Install the thrust washer (7) | ||
12 | Install the bearings fastening lock nut (6) and adjust the axial play | When tightening the nut, turn continuously the hub. | |
| |||
13 | Tighten the lock bolt (5) up to the prescribed torque | | |
14 | Supply the wheel cap (3) with grease | | |
15 | Install the joint (4), the hub cap (3) and the bolts (2) | Use a new joint. | |
| |||
16 | Install the brake drum (1) fastening it provisionally with two wheel nuts () |
Wheel location, wheel hub
Número | Denominação | Front axle 739.3, 739.5 | |||
BA33.20-B-1004-01B | Nut with lock screw | M24x1.5 | Nm | - | |
M40x1.5 | 200 | ||||
BA33.20-B-1005-01B | Lock screw | M8 | Nm | 30 | |
M10 | 65 | ||||
BA33.20-B-1006-01B | Hub cap screw | M8 | Nm | 30 | |
M10 | Nm | 65 | |||
Wheel hub, hub cap
Número | Denominação | Front axle 739.3, 739.4 | |||
BF33.20-B-1001-01A | Wheel hub grease (per hub) | Replenishment quantity | Grams | 180 | |
BF33.20-B-1002-01A | Hubcap grease | Replenishment quantity | Grams | 40 | |
389 589 00 13 00
Special wrench
035 589 01 33 00
Puller
000 589 45 33 00
Puller
363 589 02 21 00
Dial gage support
001 589 53 21 00
Dial gage
055 589 00 43 00
Spindle for the installation of the hub
055 589 34 15 00
Drift
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1002-06A | Grease according to DBL 6811.00.20 - Class 266.2 | - |
BR00.45-B-1003-06A | Grease as per DBL 6804 - Class 267.0 | - |
Referenzierte Dokumente
- ar3320b0300c Radlagerspiel einstellen
- ar3320b031001a
- ar3320b031004a