AR26.30-B-6521B | Disassembling and assembling reverse gear stop bearing cover | 12.02.16 |
Manual transmission 714.120, 714.124, 714.140, 714.144, 721.940
T26.60-0018-01
1 Cover of rear blocking bearing
2 Pressure spring
3 Lock ring
4 Blocking pin
5 Cylindrical pin
6 Needle bearing
| Disassemble and assemble | ||
1 | Remove the gearbox control. | ||
2 | Remove the needle bearing (6) from the cover of the rear blocking bearing (1) | Secure the internal bearing cover (1) in a bench vise, protecting the vise jaws with an aluminum protection. | |
| |||
| |||
Assemble: Utilize a suitable drift and install the needle bearing (6) in the cover of the rear blocking bearing (1). | |||
| |||
3 | Remove the snap-ring (3) | ||
4 | Lift out the pressure spring (2) and the blocking pin (4) upwards, utilizing a suitable wrench | ||
5 | Clean all parts, check them for wear and repair damaged parts | ||
6 | Install in reverse order |
000 589 27 33 00
Internal puller
000 589 33 33 00
Counter support
403 589 05 15 00
Mandrel