AR13.25-B-3200B | Remove/install poly-V belt tensioning device | 12.02.16 |
Cumbustion engine 374, 376 with Vehicle 382, 384, 386, 682, 688, 693
B13.25-0002-08
1 Tensioner bolt
2 Tensioner bracket bolt
3 Tensioner nut (adjustment)
3a Tensioner bracket
4 Hydraulic pump
4a Hydraulic pump pulley
4b Pulley nut
4c Pressure washer
5 Hydraulic pump support
5a Pivot bolt
5b Nut
5c Flat washer
5d Pump attachment bolt
5e Nut
5f Pressure washer
5g Flat washer
6 Main support attached in the head
6a Support bolt
6b Support bushing
6c Bolt
7 Bolt
7a Tensioner bushing
8 Belt
| Remove and install | ||
Danger! | Risk of injuries and damage to the materials when running the engine with the gearbox engaged and by performing works with the engine heated and running | ||
1 | Turn the general switch off or disconnect the negative cable | Release the negative cable bolt in the chassis rail, avoid releasing the battery terminals. | |
2 | Remove the belt (8) | Install: Inspect the belt state, if necessary replace it. | |
| |||
3 | Release and remove the attachment bolt (2) from the bracket (3a) | Install: Inspect the bolt state, if necessary replace it. | |
4 | Release and remove the bolt (7) | Install: Inspect the bushing (7a), the bolt (7), if necessary replace them. | |
Apply the recommended torque in the bolt (7). | |||
5 | Remove the oil pump (4) | Install: Inspect the bushing (6b) and if necessary replace it, for that, remove the support (6), In the assembling, apply the recommended torque in the bolts (6a). | |
| |||
6 | Install in reverse order |
Power steering pump
Referenzierte Dokumente
- ap1320b1350b Keilriemen - Zustand prüfen, nachspannen
- as0000b000501a Unfallgefahr durch selbsttätiges Anfahren bei laufendem Motor. Verletzungsgefahr durch Quetschungen und Verbrennungen bei Eingriffen während des Startvorganges oder am laufenden Motor