Remove/install wiring harness for fuel injectors

AR07.16-B-1008EVI

Remove/install wiring harness for fuel injectors

21.03.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

1

Nuts

B601

Camshaft position sensor

Y611

Cylinder fuel injector 4

2

Wiring harness

X603.16

Electrical connector of the cylinder head

Y612

Cylinder fuel injector 5

3

Electrical connector

Y608

Cylinder fuel injector 1

Y613

Cylinder fuel injector 6

4

Cable route

Y609

Cylinder fuel injector 2

5

Sealing rings

Y610

Cylinder fuel injector 3

 

Remove/install

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

1

Turn off ignition

2

Remove the cylinder head cover

3

Remove the nuts (1) of the fuel injectors (Y608 until Y613)

 Nuts (1) are protected against falling in the wiring harness (2).

 Electric conductor nut in the fuel injector on cylinder

*BA07.16-B-1013-03EVI

 Torque screwdriver

*001589802100

4

Separate the electrical connector (3) in the camshaft position sensor (B601)

5

Separate the electrical connector of the cylinder head (X603.16) in the wiring harness (2)

6

Remove the cable route (4) in the camshaft frame

 Replace the sealing rings (5) and lubricate them with engine oil.

7

Remove the wiring harness (2)

8

Install in reverse order

 Common Rail Diesel Injection System

Number

Designation

ENGINE 936.9

BA07.16-B-1013-03EVI

Electric conductor nut in the fuel injector on cylinder

Nm

2