AR01.20-B-5014J | Remove/install cylinder head cover | 12.02.16 |
Cumbustion engine 376.919 with Vehicle 382.068
B01.20-0009-04
M 366 LAG
1 Head cap
2 Ignition coils
3 Cap fastening screws
4 Flat washer
5 Cap gasket
6 O-rings in protective sleeves
7 Spark plug protective sleeve
| Remove and install | ||
Danger! | Safety measures when servicing gas engines. | ||
| The access for maintenance and repair work vary according to the type/manufacturer of the body. | Refer to the bodybuilder's instructions. | |
1 | Turn off the main switch or disconnect the negative battery cable. | ||
2 | Clean the top of the engine. | ||
3 | Remove the ignition coils (2). | ||
4 | Remove the screws (3) and washers (4). | Install: Tighten the screws evenly and alternately. | |
| |||
5 | Remove the cap (1) and the gasket (5). | Install: Replace the gasket (5). Check the O-rings (6), replace if necessary. | |
6 | Install in the reverse order. |
Crankcase ventilation, cylinder head cover
Referenzierte Dokumente
- ar1512b2003b Zündspulen aus-, einbauen
- as0000b001501a