Air filter element - checking fouling. Replace according to condition

AP09.10-B-0951G

Air filter element - checking fouling. Replace according to condition

12.02.16



Check



Run engine until coolant system water reaches service temperature

Mechanic maintenance indicator

1

Check plunger position (1) in the maintenance indicator display (3)

As soon as filter element saturation occurs, depression increases and plunger is dragged against its spring action, being held in intermediary position according to the element saturation rate.

When plunger is held in the maximum saturation position (plunger completely visible in the indicator device body display), replace filter element 

For chassis 693. 023/171/185/186

AP09.10-B-0980I

2

After filter element replacement, press release button (2) located in the maintenance indicator device end, to release plunger and make it return to the air filter low saturation degree position

Electric maintenance indicator

3

Replace filter element when maintenance indicator pilot lamp (A) is on indicating its saturation or, after maximum two years

For chassis 693.028/103/171/185/186, 694.000, 695.052

AP09.10-B-0980D

For chassis 384, 386, 388, 660, 682, 695, 696

AP09.10-B-0980F

For chassis 693.108/128/144/182/184/191/195

AP09.10-B-0980H

For chassis 693.023/081

AP09.10-B-0980I

For chassis 693.348/386/396

AP09.10-B-0980J